On Wed, Jan 17, 2018 at 01:28:51PM +0100, Martin Pieuchot wrote:
> I'm running an OpenBSD amd64 guest into an amd64 host. Dmesgs
> attached. The VM config is as follow:
>
> vm "qemu" {
> memory 128M
> disk "/usr/hack/mpi/qemu/amd64/disk.img"
> local interface tap0 lladdr 70:5f:ca:21:8d:70
> disable
> owner mpi
> }
>
> I run dhclient(8) and NAT the traffic using IP forwarding on my host.
>
> vmd(8) exited multiple times with the following error:
> vmd[98149]: vcpu_run_loop: vm 2 / vcpu 0 run ioctl failed: Invalid argument
>
> The last two times it happened it was at "reboot" time. Once after upgrading
> the machine via bsd.rd. After entering "Enter" when asked if I want to reboot
> vmd(8) crashed. The second time it happened just after typing 'reboot' in a
> ssh session.
3rd report of this in the last few weeks. Now it's happening here to me also.
I'll see if I can repro it.
-ml
> OpenBSD 6.2-current (GENERIC.MP) #369: Tue Jan 16 20:06:05 MST 2018
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8238301184 (7856MB)
> avail mem = 7981674496 (7611MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries)
> bios0: vendor LENOVO version "N14ET26W (1.04 )" date 01/23/2015
> bios0: LENOVO 20BS006BGE
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT
> SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI DMAR
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2295.08 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> acpihpet0: recalibrated TSC frequency 2394465630 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2294.69 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2294.69 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2294.69 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 3 (EXP1)
> acpiprt3 at acpi0: bus 4 (EXP2)
> acpiprt4 at acpi0: bus -1 (EXP3)
> acpiprt5 at acpi0: bus -1 (EXP6)
> acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
> acpipwrres1 at acpi0: NVP3, resource for PEG_
> acpipwrres2 at acpi0: NVP2, resource for PEG_
> acpitz0 at acpi0: critical temperature is 128 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> "LEN0071" at acpi0 not configured
> "LEN0048" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "00HW003" serial 887 type LiP oem "SMP"
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT340F" at acpi0 not configured
> acpivideo0 at acpi0: VID_
> acpivout at acpivideo0 not configured
> acpivideo1 at acpi0: VID_
> cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2401, 2400, 2300, 2100, 2000,
> 1900, 1700, 1600, 1400, 1300, 1200, 1000, 900, 800, 600, 500 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 2560x1440, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
> xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
> addr 1
> "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel I218-V" rev 0x03: msi, address
> 54:ee:75:43:b3:62
> azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
> azalia1: codecs: Realtek ALC292
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
> pci1 at ppb0 bus 3
> ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
> pci2 at ppb1 bus 4
> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
> ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
> ahci0: port 3: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 3 lun 0: <ATA, SAMSUNG MZNTE256, EXT2> SCSI3 0/direct
> fixed naa.5002538844584d30
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int
> 18
> iic0 at ichiic0
> pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> Unclaimed register detected before reading register 0x23a0
> umb0 at uhub0 port 4 configuration 1 interface 0 "Sierra Wireless Inc. Sierra
> Wireless EM7345 4G LTE" rev 2.00/17.29 addr 2
> umodem0 at uhub0 port 4 configuration 1 interface 2 "Sierra Wireless Inc.
> Sierra Wireless EM7345 4G LTE" rev 2.00/17.29 addr 2
> umodem0: data interface 3, has no CM over data, has break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.01/0.01 addr 3
> uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics
> Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 4
> video0 at uvideo0
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.03 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 244190MB, 512 bytes/sector, 500102858 sectors
> root on sd1a (72519550243ad631.a) swap on sd1b dump on sd1b
> cpu_ucode_setup: no microcode found: intel/06-3d-04
> iwm0: hw rev 0x210, fw ver 16.242414.0, address 60:57:18:c1:8b:d5
> Google, Inc.
>
> Serial Graphics Adapter 11/27/17
> SGABIOS 20100422 (_<vmm@OpenBSD>) Mon Nov 27 22:20:55 UTC 2017
>
> Term: 80x46
>
> 4 0
>
> malloc finalize
>
> Space available for UMB: c0000-ef000, f0000-f0a60
>
> Returned 253952 bytes of ZoneHigh
>
> e820 map has 6 items:
>
> 0: 0000000000000000 - 000000000009f800 = 1 RAM
>
> 1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
>
> 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
>
> 3: 0000000000100000 - 0000000007ffe000 = 1 RAM
>
> 4: 0000000007ffe000 - 0000000008000000 = 2 RESERVED
>
> 5: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
> locking shadow ram
>
> Unable to lock ram - bridge not found
>
> Jump to int19
>
> enter handle_19:
> NULL
>
> Boooottiinngg ffrroomm HHaarrdd DDiisskk......
>
>
> Booting from 0000:7c00
>
> Using drive 0, partition 3.
>
> Loading.....
> probing: pc0enter handle_11:
>
> a=000421e1 b=00000001 c=00053df0 d=00000030 ds=0000 es=0000 ss=0000
>
> si=00053e10 di=00053e10 bp=0000ff9c sp=0000ff52 cs=4012 ip=1753 f=0246
> com0 mem[638K 126M a20=on]
>
> disk:invalid handle_legacy_disk:729:
> a=00000000 b=00000000 c=000001d4 d=00000000 ds=0000 es=5557 ss=0000
> si=00055a94 di=00000000 bp=0000fd88 sp=0000fd3e cs=4012 ip=1753 f=0246
> invalid handle_legacy_disk:729:
>
> a=00000800 b=00000000 c=000001d4 d=00000000 ds=0000 es=5557 ss=0000
>
> si=00000001 di=00000000 bp=0000fd88 sp=0000fd3e cs=4012 ip=1753 f=0246
> hd0+
>
> >> OpenBSD/amd64 BOOT 3.33
> >>
> switching console to com0
>
> >> OpenBSD/amd64 BOOT 3.33
> >>
> boot>
>
> booting hd0a:/bsd: 8488755+2438160+240976+0+663552
> [644238+90+705912+488906]=0xd
> 0b338
>
> entry point at 0x1000158
>
> [ using 1839928 bytes of bsd ELF symbol table ]
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2018 OpenBSD. All rights reserved.
> https://www.OpenBSD.org
>
>
> OpenBSD 6.2-current (GENERIC) #364: Tue Jan 16 20:01:45 MST 2018
>
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
>
> real mem = 117432320 (111MB)
>
> avail mem = 107167744 (102MB)
>
> mpath0 at root
>
> scsibus0 at mpath0: 256 targets
>
> mainbus0 at root
>
> bios0 at mainbus0
>
> acpi at bios0 not configured
>
> cpu0 at mainbus0: (uniprocessor)
>
> cpu0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2398.33 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,F
> XSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AV
> X,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,BMI1,AVX2
> ,SMEP,BMI2,ERMS,RDSEED,ADX,SMAP
> cpu0: 256KB 64b/line 8-way L2 cache
>
> cpu0: smt 0, core 0, package 0
> pvbus0 at mainbus0: OpenBSD
>
> pci0 at mainbus0 bus 0
>
> pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
>
> virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
> viornd0 at virtio0
>
> virtio0: irq 3
>
> virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Storage" rev 0x00
> vioblk0 at virtio1
>
> scsibus1 at vioblk0: 2 targets
> sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
> sd0: 3072MB, 512 bytes/sector, 6291456 sectors
> virtio1: irq 5
>
> virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
>
> vio0 at virtio2: address 70:5f:ca:21:8d:70
> virtio2: irq 6
>
> virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" rev 0x00
>
> vmmci0 at virtio3
>
> virtio3: irq 7
>
> isa0 at mainbus0
>
> isadma0 at isa0
>
> com0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo
>
> com0: console
>
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
>
> softraid0 at root
> scsibus3 at softraid0: 256 targets
>
> root on sd0a (7384820eb6b7f93a.a) swap on sd0b dump on sd0b
>
