On Wed, Apr 18, 2018 at 08:30:16PM +1000, Jonathan Gray wrote: > On Wed, Apr 18, 2018 at 11:40:06AM +0200, Alexander Bluhm wrote: > > Hi, > > > > my i386 regression test machine crashed with the Tue Apr 17 snapshot > > in radeondrm_attachhook(). > > So the machine doesn't have /etc/firmware/radeon/R100_cp.bin ? > > I have an i386 laptop that loads r100 microcode which works.
Even after removing the firmware I don't hit this. Machine doesn't have PAE though. OpenBSD 6.3-current (GENERIC) #552: Tue Apr 17 22:07:30 MDT 2018 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC real mem = 1341014016 (1278MB) avail mem = 1301983232 (1241MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 06/02/06, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries) bios0: vendor IBM version "1RETDPWW (3.21 )" date 06/02/2006 bios0: IBM 2378JZM acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) USB0(S3) USB1(S3) AC9M(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 2 (PCI1) acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7 acpitz0 at acpi0: critical temperature is 93 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpicmos0 at acpi0 "IBM0057" at acpi0 not configured "IBM0071" at acpi0 not configured acpibat0 at acpi0: BAT0 model "IBM-92P1011" serial 3457 type LION oem "SONY" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: DOCK not docked (0) acpivideo0 at acpi0: VID_ bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0 at mainbus0: (uniprocessor) cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: Enhanced SpeedStep 1595 MHz: speeds: 1600, 1400, 1200, 1000, 800, 600 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 intelagp0 at pchb0 agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 pci1 at ppb0 bus 1 radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00 drm0 at radeondrm0 radeondrm0: irq 11 ... root on wd0a (a84015999566fd16.a) swap on wd0b dump on wd0b initializing kernel modesetting (RV200 0x1002:0x4C57 0x1014:0x0530). radeon_cp: Failed to load firmware "radeon/R100_cp.bin" error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware! drm:pid0:r100_startup *ERROR* failed initializing CP (-2). drm:pid0:r100_init *ERROR* Disabling GPU acceleration ttm_pool_mm_shrink_fini: stub radeondrm0: 1024x768, 8bpp wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > > uvm_fault(0xd0ccfb70, 0xd11e0000, 0, 1) -> e > > kernel: page fault trap, code=0 > > Stopped at pmap_page_remove_pae+0x18: cmpl $0,0x48(%edi) > > > > pmap_page_remove_pae(d11e0800) at pmap_page_remove_pae+0x18 > > ttm_tt_destroy(d5763980) at ttm_tt_destroy+0x61 > > ttm_bo_cleanup_refs_or_queue(d572cb28) at ttm_bo_cleanup_refs_or_queue+0x2b3 > > ttm_bo_unref(d0f61ed8) at ttm_bo_unref+0x69 > > radeon_bo_unref(d572cb28) at radeon_bo_unref+0x27 > > radeon_wb_fini(d572b000) at radeon_wb_fini+0x49 > > r100_init(d572b000) at r100_init+0x409 > > radeon_device_init(d572b000,d56ff400,d56ff43c,840001) at > > radeon_device_init+0x797 > > radeondrm_attachhook(d572b000) at radeondrm_attachhook+0x2b > > config_process_deferred_mountroot() at > > config_process_deferred_mountroot+0x2c > > main(0) at main+0x7bf > > > > Full console output below. > > > > bluhm > > > > >> OpenBSD/i386 BOOT 3.31 > > boot> > > booting hd0a:/bsd: 8620607+2356228+188436+0+1101824 > > [695508+98+513600+533177]=0xd5e848 > > entry point at 0x2000d4 > > > > [ using 1742920 bytes of bsd ELF symbol table ] > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > Copyright (c) 1995-2018 OpenBSD. All rights reserved. > > https://www.OpenBSD.org > > > > OpenBSD 6.3-current (GENERIC.MP) #559: Tue Apr 17 10:11:13 MDT 2018 > > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > > real mem = 2145783808 (2046MB) > > avail mem = 2092011520 (1995MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: date 07/12/06, BIOS32 rev. 0 @ 0xfd450, SMBIOS rev. 2.51 > > @ 0x7feea000 (35 entries) > > bios0: vendor Phoenix Technologies LTD version "6.00" date 07/12/2006 > > bios0: Supermicro PDSM4+ > > acpi0 at bios0: rev 0 > > acpi0: sleep states S0 S1 S4 S5 > > acpi0: tables DSDT FACP MCFG APIC BOOT SSDT > > acpi0: wakeup devices PXHA(S5) PXHB(S5) DEV3(S5) EXP1(S5) EXP5(S5) EXP6(S5) > > PCIB(S5) KBC0(S1) MSE0(S1) COM1(S5) COM2(S5) USB1(S4) USB2(S4) USB3(S4) > > USB4(S4) EUSB(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-14 > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 > > GHz > > cpu0: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF,SENSOR > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 266MHz > > cpu0: mwait min=64, max=64, C-substates=0.2, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 > > GHz > > cpu1: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF,SENSOR > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > ioapic1 at mainbus0: apid 3 pa 0xfecc0000, version 20, 24 pins > > ioapic2 at mainbus0: apid 4 pa 0xfecc0400, version 20, 24 pins > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 2 (PXHA) > > acpiprt2 at acpi0: bus 3 (PXHB) > > acpiprt3 at acpi0: bus -1 (DEV3) > > acpiprt4 at acpi0: bus 9 (EXP1) > > acpiprt5 at acpi0: bus 13 (EXP5) > > acpiprt6 at acpi0: bus 14 (EXP6) > > acpiprt7 at acpi0: bus 15 (PCIB) > > acpicpu0 at acpi0: C1(@1 halt!) > > acpicpu1 at acpi0: C1(@1 halt!) > > acpicmos0 at acpi0 > > "PNP0A05" at acpi0 not configured > > acpibtn0 at acpi0: PWRB > > bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1000 0xcc000/0x1000 0xcd000/0x2600 > > ipmi at mainbus0 not configured > > cpu0: Enhanced SpeedStep disabled by BIOS > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0 > > ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: apic 2 int 16 > > pci1 at ppb0 bus 1 > > ppb1 at pci1 dev 0 function 0 "Intel 6700PXH PCIE-PCIX" rev 0x09 > > pci2 at ppb1 bus 2 > > em0 at pci2 dev 2 function 0 "Intel 82545GM" rev 0x04: apic 3 int 4, > > address 00:04:23:cd:41:fb > > "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured > > ppb2 at pci1 dev 0 function 2 "Intel 6700PXH PCIE-PCIX" rev 0x09 > > pci3 at ppb2 bus 3 > > em1 at pci3 dev 1 function 0 "Intel 82545GM" rev 0x04: apic 4 int 0, > > address 00:1b:21:0e:6e:8e > > ami0 at pci3 dev 3 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 4 int > > 4 > > ami0: LSI 520, 64b/lhc, FW 1L47, BIOS vG121, 128MB RAM > > ami0: 1 channels, 0 FC loops, 2 logical drives > > scsibus1 at ami0: 40 targets > > sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed > > sd0: 35045MB, 512 bytes/sector, 71772160 sectors > > sd1 at scsibus1 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed > > sd1: 140271MB, 512 bytes/sector, 287275008 sectors > > scsibus2 at ami0: 16 targets > > "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 3 not configured > > ppb3 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17 > > pci4 at ppb3 bus 9 > > ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17 > > pci5 at ppb4 bus 13 > > em2 at pci5 dev 0 function 0 "Intel 82573E" rev 0x03: msi, address > > 00:30:48:8c:50:20 > > ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16 > > pci6 at ppb5 bus 14 > > em3 at pci6 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address > > 00:30:48:8c:50:21 > > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23 > > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19 > > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18 > > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16 > > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 > > pci7 at ppb6 bus 15 > > radeondrm0 at pci7 dev 4 function 0 "ATI ES1000" rev 0x02 > > drm0 at radeondrm0 > > radeondrm0: apic 2 int 16 > > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled > > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > > channel 0 configured to compatibility, channel 1 configured to compatibility > > atapiscsi0 at pciide0 channel 0 drive 1 > > scsibus3 at atapiscsi0: 2 targets > > cd0 at scsibus3 targ 0 lun 0: <Optiarc, DVD RW AD-7543A, 1-00> ATAPI > > 5/cdrom removable > > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > > pciide0: channel 1 disabled (no drives) > > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 > > int 19 > > iic0 at ichiic0 > > lm1 at iic0 addr 0x2d: W83627HF > > wbng0 at iic0 addr 0x2f: w83793g > > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-4200CL5 > > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-4200CL5 > > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 > > usb2 at uhci1: USB revision 1.0 > > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 > > usb3 at uhci2: USB revision 1.0 > > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 > > usb4 at uhci3: USB revision 1.0 > > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 > > isa0 at ichpcib0 > > isadma0 at isa0 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > com0: console > > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > lpt0 at isa0 port 0x378/4 irq 7 > > wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41 > > lm2 at wbsio0 port 0x290/8: W83627HF > > lm1: disabling sensors due to alias with lm2 > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > vmm0 at mainbus0: VMX > > rum0 at uhub0 port 5 configuration 1 interface 0 "Ralink Technology RT2573" > > rev 2.00/0.01 addr 2 > > rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address d8:5d:4c:8f:29:2f > > vscsi0 at root > > scsibus4 at vscsi0: 256 targets > > softraid0 at root > > scsibus5 at softraid0: 256 targets > > root on sd0a (3c01ce510560b397.a) swap on sd0b dump on sd0b > > initializing kernel modesetting (RV100 0x1002:0x515E 0x1002:0x515E). > > radeon_cp: Failed to load firmware "radeon/R100_cp.bin" > > error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware! > > drm:pid0:r100_startup *ERROR* failed initializing CP (-2). > > drm:pid0:r100_init *ERROR* Disabling GPU acceleration > > uvm_fault(0xd0ccfb70, 0xd11e0000, 0, 1) -> e > > kernel: page fault trap, code=0 > > Stopped at pmap_page_remove_pae+0x18: cmpl $0,0x48(%edi) > > ddb{0}> trace > > pmap_page_remove_pae(d11e0800) at pmap_page_remove_pae+0x18 > > ttm_tt_destroy(d5763980) at ttm_tt_destroy+0x61 > > ttm_bo_cleanup_refs_or_queue(d572cb28) at ttm_bo_cleanup_refs_or_queue+0x2b3 > > ttm_bo_unref(d0f61ed8) at ttm_bo_unref+0x69 > > radeon_bo_unref(d572cb28) at radeon_bo_unref+0x27 > > radeon_wb_fini(d572b000) at radeon_wb_fini+0x49 > > r100_init(d572b000) at r100_init+0x409 > > radeon_device_init(d572b000,d56ff400,d56ff43c,840001) at > > radeon_device_init+0x797 > > radeondrm_attachhook(d572b000) at radeondrm_attachhook+0x2b > > config_process_deferred_mountroot() at > > config_process_deferred_mountroot+0x2c > > main(0) at main+0x7bf > > ddb{0}> show panic > > the kernel did not panic > > ddb{0}> ps > > PID TID PPID UID S FLAGS WAIT COMMAND > > 57351 316378 0 0 3 0x14200 bored ttm_swap > > 82208 223952 0 0 7 0x14200 zerothread > > 92983 123432 0 0 3 0x14200 aiodoned aiodoned > > 52601 142782 0 0 3 0x14200 syncer update > > 29162 16585 0 0 3 0x14200 cleaner cleaner > > 97090 167215 0 0 3 0x14200 reaper reaper > > 22704 220666 0 0 3 0x14200 pgdaemon pagedaemon > > 76146 179250 0 0 3 0x14200 bored crynlk > > 17336 379823 0 0 3 0x14200 bored crypto > > 2587 88505 0 0 3 0x14200 fdprobe fdcattach > > 78045 219036 0 0 3 0x14200 usbtsk usbtask > > 17847 426273 0 0 3 0x14200 usbatsk usbatsk > > 98549 348763 0 0 3 0x14200 bored sensors > > 57884 422046 0 0 3 0x40014200 acpi0 acpi0 > > 19789 207816 0 0 1 0x14200 idle1 > > 25879 485126 0 0 3 0x14200 bored softnet > > 71257 149852 0 0 3 0x14200 bored systqmp > > 1302 142592 0 0 3 0x14200 bored systq > > 6487 44977 0 0 3 0x40014200 bored softclock > > 80327 82376 0 0 3 0x40014200 idle0 > > 32446 408372 0 0 3 0x14200 kmalloc kmthread > > 1 133585 0 0 3 0 initexec swapper > > * 0 0 -1 0 7 0x10200 swapper > > >