My responses Inline. Due apologies, will do my best to get these reports right.
Thanks, ; Long ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Friday, February 15, 2019 9:48 PM, Mike Larkin <[email protected]> wrote: > On Fri, Feb 15, 2019 at 05:53:11PM +0000, longwuyuan wrote: > > > I started vmd with -d -vv in foreground but there is not a single message > > related to the locked up alpine linux VM > > You really need to work on these reports. I'll give it one more try. > > 1. How did you install this VM? Did you use that .iso you showed below? Long: Yes. That iso was used. Install to disk works with problems but this mail is not about install to disk problems prevailing with Alpine Linux. > 2. Did you remember to set up a serial console when installing? Long: Yes, have consistently and successfully used serial console. > 3. What does 'locked up' even mean? How do you know it's locked up? Long: A working healthy VM stops responding to keys on serial console or over the TCP/IP connections. VM is visible in output of "vmctl show". > 4. Can you ping the machine? Did you set up networking for that? Can you ssh > to > it? What is your bridge configuration for bridge0? Is pf.conf set right > for that bridge and/or NATting? > Long: On starting the VM, bridge works, nat works I can install software and ssh into it. After a few minutes there are no responses to keystrokes or ping. > 5. What's shown in vmctl console just before the 'locked up' problem? Did you > boot the vm using vmctl start -c and see how far the boot proceeded? > Long: VM was booted using -c and works until a few minutes later ping, ssh and serial console stops working while VM seems to be running in output of "vmctl show". > 6. What is the vmd(8) process associated with this VM doing? Is it spinning? > Idle? > Long: me:/home/me:15$ ps uxa | grep vmd _vmd 73314 92.8 0.1 2100032 22076 ?? Rp/1 11:18AM 4:14.54 vmd: alpine1 (vmd) _vmd 76497 0.0 0.0 1288 1876 ?? Ssp 12:06AM 0:00.02 vmd: control (vmd) root 72834 0.0 0.0 1552 1848 ?? Ssp 12:06AM 0:00.01 /usr/sbin/vmd -v root 7631 0.0 0.0 1228 1792 ?? Is 12:06AM 0:00.00 vmd: priv (vmd) _vmd 4360 0.0 0.0 1304 1920 ?? Ssp 12:06AM 0:00.63 vmd: vmm (vmd) me 66619 0.0 0.0 316 1276 p6 S+p 11:27AM 0:00.00 grep vmd me:/home/me:16$ > 7. Did you try building with VMM_DEBUG to see if any useful information shows > up in dmesg? > > ... etc ... This is the simplest example below of the problem. I started the VM, I login over ssh and I start a while true loop to see date. After a few minutes the VM goes into problem state ; alpine1:~$ while true ; do date ; sleep 3 ; done | tee checkuptime.txt Sat Feb 16 11:19:50 IST 2019 Sat Feb 16 11:19:53 IST 2019 Sat Feb 16 11:19:56 IST 2019 Sat Feb 16 11:19:59 IST 2019 Sat Feb 16 11:20:02 IST 2019 Sat Feb 16 11:20:05 IST 2019 Sat Feb 16 11:20:08 IST 2019 Sat Feb 16 11:20:11 IST 2019 Sat Feb 16 11:20:14 IST 2019 Sat Feb 16 11:20:17 IST 2019 Sat Feb 16 11:20:20 IST 2019 Sat Feb 16 11:20:23 IST 2019 Sat Feb 16 11:20:26 IST 2019 Sat Feb 16 11:20:29 IST 2019 Sat Feb 16 11:20:32 IST 2019 Sat Feb 16 11:20:35 IST 2019 Sat Feb 16 11:20:38 IST 2019 Sat Feb 16 11:20:41 IST 2019 Sat Feb 16 11:20:44 IST 2019 Sat Feb 16 11:20:47 IST 2019 Sat Feb 16 11:20:50 IST 2019 Sat Feb 16 11:20:53 IST 2019 Sat Feb 16 11:20:56 IST 2019 Sat Feb 16 11:20:59 IST 2019 Sat Feb 16 11:21:02 IST 2019 Sat Feb 16 11:21:05 IST 2019 Sat Feb 16 11:21:08 IST 2019 Sat Feb 16 11:21:11 IST 2019 Sat Feb 16 11:21:14 IST 2019 Sat Feb 16 11:21:18 IST 2019 Sat Feb 16 11:21:21 IST 2019 Sat Feb 16 11:21:24 IST 2019 Sat Feb 16 11:21:27 IST 2019 Sat Feb 16 11:21:30 IST 2019 Sat Feb 16 11:21:33 IST 2019 Sat Feb 16 11:21:36 IST 2019 Sat Feb 16 11:21:39 IST 2019 Sat Feb 16 11:21:42 IST 2019 Sat Feb 16 11:21:45 IST 2019 Sat Feb 16 11:21:48 IST 2019 Sat Feb 16 11:21:51 IST 2019 Sat Feb 16 11:21:54 IST 2019 Sat Feb 16 11:21:57 IST 2019 Sat Feb 16 11:22:00 IST 2019 Sat Feb 16 11:22:03 IST 2019 Sat Feb 16 11:22:06 IST 2019 Sat Feb 16 11:22:09 IST 2019 Sat Feb 16 11:22:12 IST 2019 Sat Feb 16 11:22:15 IST 2019 Sat Feb 16 11:22:18 IST 2019 Sat Feb 16 11:22:21 IST 2019 Sat Feb 16 11:22:24 IST 2019 Sat Feb 16 11:22:27 IST 2019 Sat Feb 16 11:22:30 IST 2019 Sat Feb 16 11:22:33 IST 2019 Timeout, server 192.168.192.1 not responding. > > -ml > > > > System : OpenBSD 6.4 > > Details : OpenBSD 6.4-current (GENERIC.MP) #724: Thu Feb 14 23:08:31 > > MST 2019 > > [email protected]:/usr/src/sys/arch/amd64/compi > > le/GENERIC.MP > > > > Architecture: OpenBSD.amd64 > > Machine : amd64 > > > > > > me:39$ date > > Fri Feb 15 19:14:54 IST 2019 > > me:40$ doas rcctl check vmd > > vmd(failed) > > me:41$ grep vmd /etc/rc.conf.local > > vmd_flags=-v > > me:42$ > > me:20$ cat /etc/vm.conf > > switch "uplink" { > > interface bridge0 > > } > > vm "alpine1" { > > memory 4G > > disk "/home/me/vmd/alpine/alpine1disk1" > > interface { switch "uplink" } > > owner me > > } > > me:21$ > > me:45$ ls -l > > total 1192064 > > -rw-r--r-- 1 me me 36700160 Feb 13 20:59 alpine-virt-3.9.0-x86_64.iso > > -rw------- 1 me me 21474836480 Feb 15 19:13 alpine1disk1 > > me:46$ > > me:46$ doas rcctl start vmd > > vmd(ok) > > me:47$ vmctl show > > ID PID VCPUS MAXMEM CURMEM TTY OWNER NAME > > 1 38637 1 4.0G 3.5M ttyp0 me alpine1 > > me:48$ > > dmesg : > > OpenBSD 6.4-current (GENERIC.MP) #707: Tue Feb 12 12:23:54 MST 2019 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 16548405248 (15781MB) > > avail mem = 16037179392 (15294MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xd6e18000 (63 entries) > > bios0: vendor LENOVO version "R02ET68W (1.41 )" date 09/25/2018 > > bios0: LENOVO 20F6A06CCD > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP TCPA SSDT UEFI SSDT SSDT ECDT HPET APIC MCFG SSDT > > SSDT DBGP DBG2 BOOT BATB SSDT SSDT POAT DMAR ASF! FPDT UEFI > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP8(S4) XHCI(S3) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpiec0 at acpi0 > > acpihpet0 at acpi0: 23999999 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2392.87 MHz, 06-4e-03 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 24MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.43 MHz, 06-4e-03 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 1 (application processor) > > cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.43 MHz, 06-4e-03 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 1, core 0, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.43 MHz, 06-4e-03 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG0) > > acpiprt2 at acpi0: bus -1 (PEG1) > > acpiprt3 at acpi0: bus -1 (PEG2) > > acpiprt4 at acpi0: bus 2 (EXP1) > > acpiprt5 at acpi0: bus 4 (EXP3) > > acpiprt6 at acpi0: bus -1 (EXP4) > > acpiprt7 at acpi0: bus -1 (EXP5) > > acpiprt8 at acpi0: bus -1 (EXP8) > > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI > > acpipwrres1 at acpi0: PG00, resource for PEG0 > > acpipwrres2 at acpi0: PG01, resource for PEG1 > > acpipwrres3 at acpi0: PG02, resource for PEG2 > > acpipwrres4 at acpi0: WRST > > acpipwrres5 at acpi0: WRST > > acpitz0 at acpi0: critical temperature is 128 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > acpibat0 at acpi0: BAT0 model "45N1773" serial 4414 type LION oem "SANYO" > > acpibat1 at acpi0: BAT1 model "45N1777" serial 3778 type LION oem "SANYO" > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x001b15d1 rev 0x10 > > acpivideo0 at acpi0: GFX0 > > acpivout at acpivideo0 not configured > > cpu0: Enhanced SpeedStep 2392 MHz: speeds: 2501, 2500, 2400, 2300, 2100, > > 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07 > > drm0 at inteldrm0 > > inteldrm0: msi > > error: [drm:pid0:i915_firmware_load_error_print] ERROR failed to load > > firmware i915/skl_dmc_ver1.bin (-22) > > error: [drm:pid0:i915_gem_init_hw] ERROR Failed to initialize GuC, error -8 > > (ignored) > > inteldrm0: 1920x1080, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > > 1.0 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI > > 1.3.1 > > ahci0: port 1: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 1 lun 0: <ATA, Lenovo SSD ST5, P092> SCSI3 0/direct > > fixed t10.ATA_Lenovo_SSD_ST510_240G_LST5524016C27D00813_ > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > > pci2 at ppb1 bus 4 > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x2a, > > msi > > pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21 > > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > > azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi > > azalia0: codecs: Realtek/0x0293, Intel/0x2809, using Realtek/0x0293 > > audio0 at azalia0 > > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 > > int 16 > > iic0 at ichiic0 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > vmm0 at mainbus0: VMX/EPT > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT INC. > > Integrated Camera" rev 2.00/0.03 addr 2 > > video0 at uvideo0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (e9441b030f2151ee.a) swap on sd0b dump on sd0b > > WARNING: / was not properly unmounted > > iwm0: hw rev 0x200, fw ver 16.242414.0, address 34:13:e8:3c:9c:a9 > > umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk ExtremePro" rev > > 2.10/0.10 addr 3 > > umass0: using SCSI over Bulk-Only > > scsibus4 at umass0: 2 targets, initiator 0 > > sd1 at scsibus4 targ 1 lun 0: <SanDisk, ExtremePro, 0001> SCSI4 0/direct > > removable serial.07815588141140291294 > > sd1: 122104MB, 512 bytes/sector, 250069680 sectors > > ext2fs: your file system says it needs recovery > > sd1 detached > > scsibus4 detached > > umass0 detached > > acpivideo0: unknown event 0x00 > > video0 detached > > uvideo0 detached > > uhub0 detached > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > error: [drm:pid65354:i915_gem_init_hw] ERROR Failed to initialize GuC, > > error -8 (ignored) > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT INC. > > Integrated Camera" rev 2.00/0.03 addr 2 > > video0 at uvideo0 > > acpivideo0: unknown event 0x00 > > video0 detached > > uvideo0 detached > > uhub0 detached > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > error: [drm:pid65354:i915_gem_init_hw] ERROR Failed to initialize GuC, > > error -8 (ignored) > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT INC. > > Integrated Camera" rev 2.00/0.03 addr 2 > > video0 at uvideo0 > > iridium[13886]: pledge "rpath", syscall 5 > > iridium[10102]: pledge "rpath", syscall 5 > > iridium[5424]: pledge "rpath", syscall 5 > > iridium[67727]: pledge "rpath", syscall 5 > > iridium[96816]: pledge "rpath", syscall 5 > > iridium[58165]: pledge "rpath", syscall 5 > > syncing disks... done > > rebootin > > OpenBSD 6.4-current (RAMDISK_CD) #691: Thu Feb 14 23:14:56 MST 2019 > > [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > > real mem = 16548405248 (15781MB) > > avail mem = 16042897408 (15299MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xd6e18000 (63 entries) > > bios0: vendor LENOVO version "R02ET68W (1.41 )" date 09/25/2018 > > bios0: LENOVO 20F6A06CCD > > acpi0 at bios0: rev 2 > > acpi0: tables DSDT FACP TCPA SSDT UEFI SSDT SSDT ECDT HPET APIC MCFG SSDT > > SSDT DBGP DBG2 BOOT BATB SSDT SSDT POAT DMAR ASF! FPDT UEFI > > acpiec0 at acpi0 > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2392.79 MHz, 06-4e-03 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: apic clock running at 23MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > cpu at mainbus0: not configured > > cpu at mainbus0: not configured > > cpu at mainbus0: not configured > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG0) > > acpiprt2 at acpi0: bus -1 (PEG1) > > acpiprt3 at acpi0: bus -1 (PEG2) > > acpiprt4 at acpi0: bus 2 (EXP1) > > acpiprt5 at acpi0: bus 4 (EXP3) > > acpiprt6 at acpi0: bus -1 (EXP4) > > acpiprt7 at acpi0: bus -1 (EXP5) > > acpiprt8 at acpi0: bus -1 (EXP8) > > acpicpu at acpi0 not configured > > acpipwrres at acpi0 not configured > > acpipwrres at acpi0 not configured > > acpipwrres at acpi0 not configured > > acpipwrres at acpi0 not configured > > acpipwrres at acpi0 not configured > > acpipwrres at acpi0 not configured > > acpitz at acpi0 not configured > > "PNP0C0D" at acpi0 not configured > > "PNP0C0E" at acpi0 not configured > > "PNP0A08" at acpi0 not configured > > "PNP0B00" at acpi0 not configured > > "PNP0C0A" at acpi0 not configured > > "PNP0C0A" at acpi0 not configured > > "ACPI0003" at acpi0 not configured > > "LEN0068" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C31" at acpi0 not configured > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08 > > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07 > > wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) > > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > > 1.0 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > "Intel 100 Series Thermal" rev 0x21 at pci0 dev 20 function 2 not configured > > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI > > 1.3.1 > > ahci0: port 1: 6.0Gb/s > > scsibus0 at ahci0: 32 targets > > sd0 at scsibus0 targ 1 lun 0: <ATA, Lenovo SSD ST5, P092> SCSI3 0/direct > > fixed t10.ATA_Lenovo_SSD_ST510_240G_LST5524016C27D00813_ > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > > pci2 at ppb1 bus 4 > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x2a, > > msi > > "Intel 100 Series LPC" rev 0x21 at pci0 dev 31 function 0 not configured > > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > > "Intel 100 Series HD Audio" rev 0x21 at pci0 dev 31 function 3 not > > configured > > "Intel 100 Series SMBus" rev 0x21 at pci0 dev 31 function 4 not configured > > isa0 at mainbus0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay1 > > "SunplusIT INC. Integrated Camera" rev 2.00/0.03 addr 2 at uhub0 port 8 not > > configured > > softraid0 at root > > scsibus1 at softraid0: 256 targets > > root on rd0a swap on rd0b dump on rd0b > > iwm0: could not read firmware iwm-8000C-16 (error 2) > > iwm0: failed to load init firmware > > iwm0: hw rev 0x200, fw ver 16.242414.0, address 34:13:e8:3c:9c:a9 > > syncing disks... done > > OpenBSD 6.4-current (GENERIC.MP) #724: Thu Feb 14 23:08:31 MST 2019 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 16548405248 (15781MB) > > avail mem = 16037171200 (15294MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xd6e18000 (63 entries) > > bios0: vendor LENOVO version "R02ET68W (1.41 )" date 09/25/2018 > > bios0: LENOVO 20F6A06CCD > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP TCPA SSDT UEFI SSDT SSDT ECDT HPET APIC MCFG SSDT > > SSDT DBGP DBG2 BOOT BATB SSDT SSDT POAT DMAR ASF! FPDT UEFI > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP8(S4) XHCI(S3) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpiec0 at acpi0 > > acpihpet0 at acpi0: 23999999 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2392.84 MHz, 06-4e-03 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 24MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.43 MHz, 06-4e-03 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 1 (application processor) > > cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.43 MHz, 06-4e-03 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 1, core 0, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.43 MHz, 06-4e-03 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG0) > > acpiprt2 at acpi0: bus -1 (PEG1) > > acpiprt3 at acpi0: bus -1 (PEG2) > > acpiprt4 at acpi0: bus 2 (EXP1) > > acpiprt5 at acpi0: bus 4 (EXP3) > > acpiprt6 at acpi0: bus -1 (EXP4) > > acpiprt7 at acpi0: bus -1 (EXP5) > > acpiprt8 at acpi0: bus -1 (EXP8) > > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI > > acpipwrres1 at acpi0: PG00, resource for PEG0 > > acpipwrres2 at acpi0: PG01, resource for PEG1 > > acpipwrres3 at acpi0: PG02, resource for PEG2 > > acpipwrres4 at acpi0: WRST > > acpipwrres5 at acpi0: WRST > > acpitz0 at acpi0: critical temperature is 128 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > acpibat0 at acpi0: BAT0 model "45N1773" serial 4414 type LION oem "SANYO" > > acpibat1 at acpi0: BAT1 model "45N1777" serial 3778 type LION oem "SANYO" > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x001b15d1 rev 0x10 > > acpivideo0 at acpi0: GFX0 > > acpivout at acpivideo0 not configured > > cpu0: Enhanced SpeedStep 2392 MHz: speeds: 2501, 2500, 2400, 2300, 2100, > > 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07 > > drm0 at inteldrm0 > > inteldrm0: msi > > error: [drm:pid0:i915_firmware_load_error_print] ERROR failed to load > > firmware i915/skl_dmc_ver1.bin (-22) > > error: [drm:pid0:i915_gem_init_hw] ERROR Failed to initialize GuC, error -8 > > (ignored) > > inteldrm0: 1920x1080, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > > 1.0 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI > > 1.3.1 > > ahci0: port 1: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 1 lun 0: <ATA, Lenovo SSD ST5, P092> SCSI3 0/direct > > fixed t10.ATA_Lenovo_SSD_ST510_240G_LST5524016C27D00813_ > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > > pci2 at ppb1 bus 4 > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x2a, > > msi > > pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21 > > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > > azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi > > azalia0: codecs: Realtek/0x0293, Intel/0x2809, using Realtek/0x0293 > > audio0 at azalia0 > > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 > > int 16 > > iic0 at ichiic0 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > vmm0 at mainbus0: VMX/EPT > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT INC. > > Integrated Camera" rev 2.00/0.03 addr 2 > > video0 at uvideo0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (e9441b030f2151ee.a) swap on sd0b dump on sd0b > > iwm0: hw rev 0x200, fw ver 16.242414.0, address 34:13:e8:3c:9c:a9 > > syncing disks... done > > rebooting... > > OpenBSD 6.4-current (GENERIC.MP) #724: Thu Feb 14 23:08:31 MST 2019 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 16548405248 (15781MB) > > avail mem = 16037179392 (15294MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xd6e18000 (63 entries) > > bios0: vendor LENOVO version "R02ET68W (1.41 )" date 09/25/2018 > > bios0: LENOVO 20F6A06CCD > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP TCPA SSDT UEFI SSDT SSDT ECDT HPET APIC MCFG SSDT > > SSDT DBGP DBG2 BOOT BATB SSDT SSDT POAT DMAR ASF! FPDT UEFI > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP8(S4) XHCI(S3) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpiec0 at acpi0 > > acpihpet0 at acpi0: 23999999 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2392.84 MHz, 06-4e-03 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 23MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.39 MHz, 06-4e-03 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 1 (application processor) > > cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.39 MHz, 06-4e-03 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 1, core 0, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.39 MHz, 06-4e-03 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG0) > > acpiprt2 at acpi0: bus -1 (PEG1) > > acpiprt3 at acpi0: bus -1 (PEG2) > > acpiprt4 at acpi0: bus 2 (EXP1) > > acpiprt5 at acpi0: bus 4 (EXP3) > > acpiprt6 at acpi0: bus -1 (EXP4) > > acpiprt7 at acpi0: bus -1 (EXP5) > > acpiprt8 at acpi0: bus -1 (EXP8) > > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI > > acpipwrres1 at acpi0: PG00, resource for PEG0 > > acpipwrres2 at acpi0: PG01, resource for PEG1 > > acpipwrres3 at acpi0: PG02, resource for PEG2 > > acpipwrres4 at acpi0: WRST > > acpipwrres5 at acpi0: WRST > > acpitz0 at acpi0: critical temperature is 128 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > acpibat0 at acpi0: BAT0 model "45N1773" serial 4414 type LION oem "SANYO" > > acpibat1 at acpi0: BAT1 model "45N1777" serial 3778 type LION oem "SANYO" > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x001b15d1 rev 0x10 > > acpivideo0 at acpi0: GFX0 > > acpivout at acpivideo0 not configured > > cpu0: Enhanced SpeedStep 2392 MHz: speeds: 2501, 2500, 2400, 2300, 2100, > > 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07 > > drm0 at inteldrm0 > > inteldrm0: msi > > error: [drm:pid0:i915_firmware_load_error_print] ERROR failed to load > > firmware i915/skl_dmc_ver1.bin (-22) > > error: [drm:pid0:i915_gem_init_hw] ERROR Failed to initialize GuC, error -8 > > (ignored) > > inteldrm0: 1920x1080, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > > 1.0 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI > > 1.3.1 > > ahci0: port 1: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 1 lun 0: <ATA, Lenovo SSD ST5, P092> SCSI3 0/direct > > fixed t10.ATA_Lenovo_SSD_ST510_240G_LST5524016C27D00813_ > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > > pci2 at ppb1 bus 4 > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x2a, > > msi > > pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21 > > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > > azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi > > azalia0: codecs: Realtek/0x0293, Intel/0x2809, using Realtek/0x0293 > > audio0 at azalia0 > > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 > > int 16 > > iic0 at ichiic0 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > vmm0 at mainbus0: VMX/EPT > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT INC. > > Integrated Camera" rev 2.00/0.03 addr 2 > > video0 at uvideo0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (e9441b030f2151ee.a) swap on sd0b dump on sd0b > > iwm0: hw rev 0x200, fw ver 16.242414.0, address 34:13:e8:3c:9c:a9 > > arp: attempt to overwrite entry for 192.168.192.1 on vether0 by > > fe:e1:bb:d1:af:3f on tap0 > > arp info overwritten for 192.168.192.1 by fe:e1:bb:d1:af:3f on vether0 > > arp: attempt to overwrite entry for 192.168.192.1 on vether0 by > > fe:e1:bb:d1:f3:32 on tap0 > > arp info overwritten for 192.168.192.1 by fe:e1:bb:d1:f3:32 on vether0 > > error: [drm:pid92171:intel_pipe_update_start] ERROR Potential atomic update > > failure on pipe A > > arp: attempt to overwrite entry for 192.168.192.1 on vether0 by > > fe:e1:bb:d1:d6:59 on tap0 > > arp info overwritten for 192.168.192.1 by fe:e1:bb:d1:d6:59 on vether0 > > arp: attempt to overwrite entry for 192.168.192.1 on vether0 by > > fe:e1:bb:d1:27:72 on tap0 > > arp info overwritten for 192.168.192.1 by fe:e1:bb:d1:27:72 on vether0 > > arp: attempt to overwrite entry for 192.168.192.1 on vether0 by > > fe:e1:bb:d1:19:cd on tap0 > > arp info overwritten for 192.168.192.1 by fe:e1:bb:d1:19:cd on vether0 > > syncing disks... done > > rebooting... > > OpenBSD 6.4-current (GENERIC.MP) #724: Thu Feb 14 23:08:31 MST 2019 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 16548405248 (15781MB) > > avail mem = 16037179392 (15294MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xd6e18000 (63 entries) > > bios0: vendor LENOVO version "R02ET68W (1.41 )" date 09/25/2018 > > bios0: LENOVO 20F6A06CCD > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP TCPA SSDT UEFI SSDT SSDT ECDT HPET APIC MCFG SSDT > > SSDT DBGP DBG2 BOOT BATB SSDT SSDT POAT DMAR ASF! FPDT UEFI > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP8(S4) XHCI(S3) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpiec0 at acpi0 > > acpihpet0 at acpi0: 23999999 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2392.81 MHz, 06-4e-03 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 23MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz, 06-4e-03 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 1 (application processor) > > cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz, 06-4e-03 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 1, core 0, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz, 06-4e-03 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG0) > > acpiprt2 at acpi0: bus -1 (PEG1) > > acpiprt3 at acpi0: bus -1 (PEG2) > > acpiprt4 at acpi0: bus 2 (EXP1) > > acpiprt5 at acpi0: bus 4 (EXP3) > > acpiprt6 at acpi0: bus -1 (EXP4) > > acpiprt7 at acpi0: bus -1 (EXP5) > > acpiprt8 at acpi0: bus -1 (EXP8) > > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI > > acpipwrres1 at acpi0: PG00, resource for PEG0 > > acpipwrres2 at acpi0: PG01, resource for PEG1 > > acpipwrres3 at acpi0: PG02, resource for PEG2 > > acpipwrres4 at acpi0: WRST > > acpipwrres5 at acpi0: WRST > > acpitz0 at acpi0: critical temperature is 128 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > acpibat0 at acpi0: BAT0 model "45N1773" serial 4414 type LION oem "SANYO" > > acpibat1 at acpi0: BAT1 model "45N1777" serial 3778 type LION oem "SANYO" > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x001b15d1 rev 0x10 > > acpivideo0 at acpi0: GFX0 > > acpivout at acpivideo0 not configured > > cpu0: Enhanced SpeedStep 2392 MHz: speeds: 2501, 2500, 2400, 2300, 2100, > > 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07 > > drm0 at inteldrm0 > > inteldrm0: msi > > error: [drm:pid0:i915_firmware_load_error_print] ERROR failed to load > > firmware i915/skl_dmc_ver1.bin (-22) > > error: [drm:pid0:i915_gem_init_hw] ERROR Failed to initialize GuC, error -8 > > (ignored) > > inteldrm0: 1920x1080, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > > 1.0 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI > > 1.3.1 > > ahci0: port 1: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 1 lun 0: <ATA, Lenovo SSD ST5, P092> SCSI3 0/direct > > fixed t10.ATA_Lenovo_SSD_ST510_240G_LST5524016C27D00813_ > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > > pci2 at ppb1 bus 4 > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x2a, > > msi > > pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21 > > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > > azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi > > azalia0: codecs: Realtek/0x0293, Intel/0x2809, using Realtek/0x0293 > > audio0 at azalia0 > > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 > > int 16 > > iic0 at ichiic0 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > vmm0 at mainbus0: VMX/EPT > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT INC. > > Integrated Camera" rev 2.00/0.03 addr 2 > > video0 at uvideo0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (e9441b030f2151ee.a) swap on sd0b dump on sd0b > > iwm0: hw rev 0x200, fw ver 16.242414.0, address 34:13:e8:3c:9c:a9 > > arp: attempt to overwrite entry for 192.168.192.1 on vether0 by > > fe:e1:bb:d1:64:a5 on tap0 > > arp info overwritten for 192.168.192.1 by fe:e1:bb:d1:64:a5 on vether0 > > acpivideo0: unknown event 0x00 > > video0 detached > > uvideo0 detached > > uhub0 detached > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > error: [drm:pid92207:i915_gem_init_hw] ERROR Failed to initialize GuC, > > error -8 (ignored) > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT INC. > > Integrated Camera" rev 2.00/0.03 addr 2 > > video0 at uvideo0 > > error: [drm:pid23183:intel_pipe_update_start] ERROR Potential atomic update > > failure on pipe A > > Thanks, > > ; Long > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > On Thursday, February 14, 2019 11:08 AM, longwuyuan > > [email protected] wrote: > > > > > Extremely sorry. Will submit bug report. > > > Thanks, > > > ; Long > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > On Thursday, February 14, 2019 9:02 AM, Mike Larkin [email protected] > > > wrote: > > > > > > > On Thu, Feb 14, 2019 at 01:34:51AM +0000, longwuyuan wrote: > > > > > > > > > Hi, > > > > > Very sorry if writing to you directly is not ok but I have had help > > > > > from you before hence this. > > > > > Alpine virt or extended or others just don't stay up even long enough > > > > > to configure ipaddress, install start sshd and add a user or set root > > > > > config. > > > > > Wondering if it works for you on current just to stay up long enough > > > > > to complete install to disk. If not how else to get a linux vm if you > > > > > have any tips. > > > > > Thanks, > > > > > ; Long > > > > > > > > That is a terrible bug report. Please follow the instructions in > > > > sendbug. > > > > -ml
