Hi Jerome,

I didn't test the with the current install6x.fs. But I also have a HP ProBook (6550b) with the same issue. I installed my system last year. On my system it helped to switch the HDD controller in the BIOS/UEFI from sata mode to ide mode. After the installation I changed back to sata mode. The installed system boots without any issues in the sata mode. Also an sysupgrade is possible. It seems there is an issue with the install ramdisk. I found the the workaround in the mailinglist archives (I belive the mailing thread was from 2016).

Best regards,
Sven

On 10/10/19 11:06 AM, Jerome Kasper wrote:
Hello again bugs@,

as my wording might be confusing, i wanted to improve my description about
that bug report. I know it’s release time, so please don’t take this mail as a
push for an answer, this is not the case, i’m not in a hurry. I’m not writing 
this
mail from the concerned machine , so if the mail is mangled please warn me.

As i was told , i used snapshots from https://ftp.hostserver.de/archive/ to
pinpoint the exact time frame when the bug appeared. I did dichotomic tests
and the result is that 28-Jul-2019 snap does boot while 29-Jul-2019 one doesn’t.

Failure occurs at boot blocks loading time. I can’t even see boot blocks loading
in post 29-jul snaps . The laptop just reboot, making it impossible to run ddb 
or
report any kernel panic. As HP have some particular BIOS Options regarding
security (see http://h10032.www1.hp.com/ctg/Manual/c02046514 , computer
setup section) i’m wondering if any option makes it buggy.

I tried to boot from both MBR and UEFI mode and result is the same. If any
technique can be used to debug this i’ll be happy to do it.

thanks for reading,
regards,
Jerome KASPER

Kernel booting failure on HP probook 4520s laptop
Category: kernel amd64
Environment:
        System      : OpenBSD 6.5
        Details     : OpenBSD 6.5-current (GENERIC.MP) #151: Sun Jul 28 
00:30:21 MDT 2019
                         
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

        Architecture: OpenBSD.amd64
        Machine     : amd64
Description:
Trying to boot on most recent snapshot than the one currently installed makes
the laptop reboot. All snapshots retried since then fails to boot.
Upgrades were tried using a usb stick with a signify verified image.
Bootloader shows up but when kernel boot times comes a reboot occurs.
MBR and UEFI fails as well.
How-To-Repeat:
ftp last amd64 install66.fs. burns it with dd on a usb stick.boot on it
Fix:
did not find any fix. Any hint to dig is welcome


dmesg:
OpenBSD 6.5-current (GENERIC.MP) #151: Sun Jul 28 00:30:21 MDT 2019
  >   [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6274478080 (5983MB)
avail mem = 6074183680 (5792MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xef800 (24 entries)
bios0: vendor Hewlett-Packard version "68AZZ Ver. F.61" date 04/25/2016
bios0: Hewlett-Packard HP ProBook 4520s
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SSDT SLIC SSDT SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S3) EHC1(S3) EHC2(S3) PCIB(S5) RP02(S4) 
ECF0(S4) RP04(S5) >WNIC(S5) RP06(S5) NIC_(S5) PEG3(S4) PEG4(S4) PEG5(S4) 
PEG6(S4) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, 2527.50 MHz, 06-25-05
cpu0: 
>FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MM>X,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS->CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,RDTSCP,LONG,LAHF,PERF,ITSC,IBR>S,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, 2526.99 MHz, 06-25-05
cpu1: 
>FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MM>X,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS->CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,RDTSCP,LONG,LAHF,PERF,ITSC,IBR>S,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 70 (PCIB)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 68 (RP04)
acpiprt6 at acpi0: bus 69 (RP06)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: COMP, resource for COM1
acpipwrres2 at acpi0: LPP_, resource for LPT0
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
"PNP0A06" at acpi0 not configured
"SYN016A" at acpi0 not configured
"HPQ0004" at acpi0 not configured
acpipci1 at acpi0 CPBG: _OSC failed
acpibat0 at acpi0: BAT0 model "Primary" serial 04915 2010/11/18 type LIon oem 
"Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
"PNP0C32" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: DGFX
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: GFX0
acpivout at acpivideo1 not configured
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133, 1999, 1866, 
1733, 1599, 1466, >1333, 1199, 1066, 933 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 3400 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
1:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility HD 5470" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: msi
azalia0: no supported codecs
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 1 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
azalia1 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi
azalia1: codecs: IDT 92HD81B1X
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x05: msi
pci4 at ppb3 bus 68
ral0 at pci4 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 1 int 19, address 
e0:2a:82:55:f8:99
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
ppb4 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x05: msi
pci5 at ppb4 bus 69
69:0:0: rom address conflict 0xfffe0000/0x20000
re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), 
msi, address >64:31:50:04:76:79
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
pci6 at ppb5 bus 70
pcib0 at pci0 dev 31 function 0 "Intel HM57 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, PLEXTOR PX-256M6, 1.03> SCSI3 0/direct 
fixed naa.5002303100349597
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <hp, CDDVDW TS-L633R, 0200> ATAPI 5/cdrom 
removable
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 7.4, 0x1e0b1 0xe40000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci7 at mainbus0 bus 255
pchb1 at pci7 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb2 at pci7 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb3 at pci7 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb4 at pci7 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb5 at pci7 dev 2 function 2 "Intel Reserved" rev 0x02
pchb6 at pci7 dev 2 function 3 "Intel Reserved" rev 0x02
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 
2.00/0.00 addr 2
uhidev0 at uhub2 port 4 configuration 1 interface 0 "Sunplus USB Optical Mouse" 
rev 2.00/0.14 addr 3
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 5 buttons, Z and W dir
wsmouse1 at ums0 mux 0
uvideo0 at uhub2 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd. HP 
Webcam [2 MP >Fixed]" rev 2.00/85.57 addr 4
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 
2.00/0.00 addr 2
ugen0 at uhub3 port 6 "Ralink Technology product 0x1000" rev 2.00/52.76 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (39aaad679502345b.a) swap on sd0b dump on sd0b
initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x103C:0x1411 0x00).
radeondrm0: 1366x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)

usbdevs:
Controller /dev/usb0:
addr 01: 8086:0000 Intel, EHCI root hub
         high speed, self powered, config 1, rev 1.00
         driver: uhub0
addr 02: 8087:0020 Intel, Rate Matching Hub
         high speed, self powered, config 1, rev 0.00
         driver: uhub2
addr 03: 1bcf:0005 Sunplus, USB Optical Mouse
         low speed, power 98 mA, config 1, rev 0.14
         driver: uhidev0
addr 04: 04f2:b1ac Chicony Electronics Co., Ltd., HP Webcam [2 MP Fixed]
         high speed, power 98 mA, config 1, rev 85.57
         driver: uvideo0
Controller /dev/usb1:
addr 01: 8086:0000 Intel, EHCI root hub
         high speed, self powered, config 1, rev 1.00
         driver: uhub1
addr 02: 8087:0020 Intel, Rate Matching Hub
         high speed, self powered, config 1, rev 0.00
         driver: uhub3
addr 03: 148f:1000 Ralink Technology, product 0x1000
         full speed, self powered, config 1, rev 52.76
         driver: ugen0


Reply via email to