Hi Lee, thank you very much for your generous offer. But I don't think this is needed. I think the umsm(4) vs. umb(4) attach problem can be attacked without having this specific device as it happens with other Sierra Wireless devices, too.
Theo had a M7700 that would not attach a umb(4) but as I understood, yours it not one of these (since you were aready working on MBIM auth with it). So this problem can't be attacked with the device from your machine. And the behavior of the one from Yahoo is unknown. Gerhard On Thu, 06 Feb 2020 11:04:02 +0900 "Lee B" <l...@shuuten.org> wrote: > Hello Gerhard, > > Theo asked me if I could get one of these devices to you. I have two choices: > > 1. Pick up the one on Yahoo Auctions (I'm in Tokyo) and send it. > > 2. Remove the one in my machine and send it. > > I'm easy either way (I won't be actively using mine until I can finish off > the > umb authentication patches). The one on Yahoo might need unlocking though - > it > seems to be a bit hit-and-miss as to whether they're locked or not. > > Let me know what you want to do. > > Lee. > > On Wed Feb 5, 2020 at 2:32 PM, Gerhard Roth wrote: > > On Wed, 05 Feb 2020 05:55:41 -0700 "Theo de Raadt" <dera...@openbsd.org> > > wrote: > > > Well, I have been given this particilular MC7700 which works as umsm, > > > but it does *NOT* match as umb, probably because it's firmware is too > > > old? Or it is in the wrong mode, I can't tell. > > > > > > The current mode can be queried with > > > > > > AT!UDUSBCOMP? > > > > > > And > > > > > > AT!UDUSBCOMP=? > > > > > > should give a list of supported interface compositions. > > > > > > My guess is that the device is in a mode that offers multiple > > interfaces. > > And MBIM is on config #2. > > > > > > Since umsm now matches on config #1, usbd_probe_and_attach() stops here > > and never probes config #2 (like it did before). > > > > > > It would be interesting if config #2 offers an AT-interfac (umsm), too. > > In that case umsm and umb could coexist. > > > > > > > > > > Gerhard > > > > > > > > > > > > > > > The alternative is that the device cannot attach at all. > > > > > > How does this get resolved? I can dig it up and show in a few days. > > > > > > Gerhard Roth <gerhard_r...@genua.de> wrote: > > > > > > > On Wed, 5 Feb 2020 19:54:01 +0900 leeb <l...@shuuten.org> wrote: > > > > > >Synopsis: umb device no longer detected > > > > > >Category: kernel > > > > > >Environment: > > > > > System : OpenBSD 6.6 > > > > > Details : OpenBSD 6.6-current (GENERIC.MP) #8: Tue Jan 14 > > > > > 20:23:40 JST 2020 > > > > > > > > > > lee@x230.tanmatsu.local:/sys/arch/amd64/compile/GENERIC.MP > > > > > > > > > > Architecture: OpenBSD.amd64 > > > > > Machine : amd64 > > > > > >Description: > > > > > Before reworking my umb authentication patches I upgraded > > > > > my -current, and found that the LTE modem was no longer > > > > > detected as a umb device. It seems to be picked up later > > > > > in the boot via umsm, but I don't think that should be > > > > > happening. > > > > > > > > That comes from https://marc.info/?l=openbsd-cvs&m=157878261716342&w=2 > > > > > > > > It's not that 'umsm picks up the device later', it's just that > > > > umsm_match() [UMATCH_VENDOR_IFACESUBCLASS] now wins over umb_match() > > > > [UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO]. > > > > > > > > Gerhard > > > > > > > > > > > > > > I happened to have an older working -current kernel saved, > > > > > so tried booting from that - the umb device is detected OK. > > > > > > > > > > To eliminate the possibility of a mistake on my part, I > > > > > swapped disks in this machine and installed a fresh current > > > > > snapshot. Same result. I've attached below the sendbug > > > > > outputs from both the working (old) kernel, and the new > > > > > (not working) kernel. > > > > > > > > > > I installed the clean -current from an image at: > > > > > ftp.jaist.ac.jp in /OpenBSD/snapshots/amd64/install66.fs > > > > > > > > > > Ran 'sysupgrade -s' on the new install to make sure I was > > > > > up-to-date. > > > > > > > > > > >How-To-Repeat: > > > > > Install or upgrade to latest snapshot on a machine with a > > > > > umb device. > > > > > > > > > > ****** sendbug -P output from OK kernel ********* > > > > > > > > > > dmesg: > > > > > OpenBSD 6.6-current (GENERIC.MP) #8: Tue Jan 14 20:23:40 JST 2020 > > > > > lee@x230.tanmatsu.local:/sys/arch/amd64/compile/GENERIC.MP > > > > > real mem = 16972566528 (16186MB) > > > > > avail mem = 16445722624 (15683MB) > > > > > mpath0 at root > > > > > scsibus0 at mpath0: 256 targets > > > > > mainbus0 at root > > > > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries) > > > > > bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013 > > > > > bios0: LENOVO 23061Q2 > > > > > acpi0 at bios0: ACPI 5.0 > > > > > acpi0: sleep states S0 S3 S4 S5 > > > > > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT > > > > > FPDT ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 BGRT > > > > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) > > > > > EHC1(S3) EHC2(S3) HDEF(S4) > > > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > > > acpihpet0 at acpi0: 14318179 Hz > > > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > > > cpu0 at mainbus0: apid 0 (boot processor) > > > > > cpu0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.78 MHz, 06-3a-09 > > > > > cpu0: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > cpu0: 256KB 64b/line 8-way L2 cache > > > > > cpu0: smt 0, core 0, package 0 > > > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > > > > cpu0: apic clock running at 99MHz > > > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > > > > cpu1 at mainbus0: apid 1 (application processor) > > > > > cpu1: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > > > > cpu1: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > cpu1: 256KB 64b/line 8-way L2 cache > > > > > cpu1: smt 1, core 0, package 0 > > > > > cpu2 at mainbus0: apid 2 (application processor) > > > > > cpu2: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.36 MHz, 06-3a-09 > > > > > cpu2: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > cpu2: 256KB 64b/line 8-way L2 cache > > > > > cpu2: smt 0, core 1, package 0 > > > > > cpu3 at mainbus0: apid 3 (application processor) > > > > > cpu3: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > > > > cpu3: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > cpu3: 256KB 64b/line 8-way L2 cache > > > > > cpu3: smt 1, core 1, package 0 > > > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > > > > acpimcfg0 at acpi0 > > > > > acpimcfg0: addr 0xf8000000, bus 0-63 > > > > > acpiec0 at acpi0 > > > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > > > acpiprt1 at acpi0: bus -1 (PEG_) > > > > > acpiprt2 at acpi0: bus 2 (EXP1) > > > > > acpiprt3 at acpi0: bus 3 (EXP2) > > > > > acpiprt4 at acpi0: bus 4 (EXP3) > > > > > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > > > > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > > > > acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > > > > acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > > > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > > > > > acpitz0 at acpi0: critical temperature is 103 degC > > > > > acpibtn0 at acpi0: LID_ > > > > > acpibtn1 at acpi0: SLPB > > > > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > > > > acpicmos0 at acpi0 > > > > > tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e > > > > > acpibat0 at acpi0: BAT0 model "45N1019" serial 33720 type LION oem > > > > > "SANYO" > > > > > acpiac0 at acpi0: AC unit online > > > > > "LEN0078" at acpi0 not configured > > > > > acpithinkpad0 at acpi0: version 1.0 > > > > > "PNP0C14" at acpi0 not configured > > > > > "PNP0C14" at acpi0 not configured > > > > > acpidock0 at acpi0: GDCK not docked (0) > > > > > acpivideo0 at acpi0: VID_ > > > > > acpivout at acpivideo0 not configured > > > > > acpivideo1 at acpi0: VID_ > > > > > cpu0: using VERW MDS workaround (except on vmm entry) > > > > > cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2500, 2400, 2300, 2200, > > > > > 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz > > > > > pci0 at mainbus0 bus 0 > > > > > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > > > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > > > > > drm0 at inteldrm0 > > > > > inteldrm0: msi > > > > > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, > > > > > xHCI 1.0 > > > > > usb0 at xhci0: USB revision 3.0 > > > > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > > > > 3.00/1.00 addr 1 > > > > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > > > > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > > > > > 3c:97:0e:a5:a3:b4 > > > > > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 > > > > > int 16 > > > > > usb1 at ehci0: USB revision 2.0 > > > > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > > > > > 2.00/1.00 addr 1 > > > > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: > > > > > msi > > > > > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > > > > > audio0 at azalia0 > > > > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > > > > > pci1 at ppb0 bus 2 > > > > > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 > > > > > int 16 > > > > > sdhc0: SDHC 3.0, 50 MHz base clock > > > > > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > > > > > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > > > > > pci2 at ppb1 bus 3 > > > > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev > > > > > 0x34: msi, MIMO 2T2R, MoW, address 6c:88:14:81:7b:9c > > > > > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > > > > > pci3 at ppb2 bus 4 > > > > > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 > > > > > int 23 > > > > > usb2 at ehci1: USB revision 2.0 > > > > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > > > > > 2.00/1.00 addr 1 > > > > > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > > > > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, > > > > > AHCI 1.3 > > > > > ahci0: port 0: 6.0Gb/s > > > > > scsibus1 at ahci0: 32 targets > > > > > sd0 at scsibus1 targ 0 lun 0: <ATA, Lexar 256GB SSD, V1.1> > > > > > naa.5000000000000000 > > > > > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > > > > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: > > > > > apic 2 int 18 > > > > > iic0 at ichiic0 > > > > > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > > > > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > > > > isa0 at pcib0 > > > > > isadma0 at isa0 > > > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > > > > pckbd0 at pckbc0 (kbd slot) > > > > > wskbd0 at pckbd0: console keyboard > > > > > pms0 at pckbc0 (aux slot) > > > > > wsmouse0 at pms0 mux 0 > > > > > wsmouse1 at pms0 mux 0 > > > > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 > > > > > pcppi0 at isa0 port 0x61 > > > > > spkr0 at pcppi0 > > > > > vmm0 at mainbus0: VMX/EPT > > > > > efifb at mainbus0 not configured > > > > > umb0 at uhub0 port 4 configuration 1 interface 12 "Sierra Wireless, > > > > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > > > > ugen0 at uhub0 port 4 configuration 1 "Sierra Wireless, Incorporated > > > > > MC7700" rev 2.00/0.06 addr 2 > > > > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate > > > > > Matching Hub" rev 2.00/0.00 addr 2 > > > > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate > > > > > Matching Hub" rev 2.00/0.00 addr 2 > > > > > vscsi0 at root > > > > > scsibus2 at vscsi0: 256 targets > > > > > softraid0 at root > > > > > scsibus3 at softraid0: 256 targets > > > > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > > > > > sd1: 244197MB, 512 bytes/sector, 500116577 sectors > > > > > root on sd1a (66cc273e47e15ca3.a) swap on sd1b dump on sd1b > > > > > inteldrm0: 1366x768, 32bpp > > > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using > > > > > wskbd0 > > > > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > > > > > > > usbdevs: > > > > > Controller /dev/usb0: > > > > > addr 01: 8086:0000 Intel, xHCI root hub > > > > > super speed, self powered, config 1, rev 1.00 > > > > > driver: uhub0 > > > > > addr 02: 1199:68a2 Sierra Wireless, Incorporated, MC7700 > > > > > high speed, self powered, config 1, rev 0.06, iSerial > > > > > 012810001060969 > > > > > driver: umb0 > > > > > driver: ugen0 > > > > > Controller /dev/usb1: > > > > > addr 01: 8086:0000 Intel, EHCI root hub > > > > > high speed, self powered, config 1, rev 1.00 > > > > > driver: uhub1 > > > > > addr 02: 8087:0024 Intel, Rate Matching Hub > > > > > high speed, self powered, config 1, rev 0.00 > > > > > driver: uhub3 > > > > > Controller /dev/usb2: > > > > > addr 01: 8086:0000 Intel, EHCI root hub > > > > > high speed, self powered, config 1, rev 1.00 > > > > > driver: uhub2 > > > > > addr 02: 8087:0024 Intel, Rate Matching Hub > > > > > high speed, self powered, config 1, rev 0.00 > > > > > driver: uhub4 > > > > > > > > > > > > > > > ****** sendbug -P output from latest kernel ********* > > > > > > > > > > dmesg: > > > > > OpenBSD 6.6-current (GENERIC.MP) #629: Mon Feb 3 17:41:16 MST 2020 > > > > > > > > > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > > > real mem = 16972566528 (16186MB) > > > > > avail mem = 16445702144 (15683MB) > > > > > mpath0 at root > > > > > scsibus0 at mpath0: 256 targets > > > > > mainbus0 at root > > > > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries) > > > > > bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013 > > > > > bios0: LENOVO 23061Q2 > > > > > acpi0 at bios0: ACPI 5.0 > > > > > acpi0: sleep states S0 S3 S4 S5 > > > > > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT > > > > > FPDT ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 BGRT > > > > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) > > > > > EHC1(S3) EHC2(S3) HDEF(S4) > > > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > > > acpihpet0 at acpi0: 14318179 Hz > > > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > > > cpu0 at mainbus0: apid 0 (boot processor) > > > > > cpu0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.77 MHz, 06-3a-09 > > > > > cpu0: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > cpu0: 256KB 64b/line 8-way L2 cache > > > > > cpu0: smt 0, core 0, package 0 > > > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > > > > cpu0: apic clock running at 99MHz > > > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > > > > cpu1 at mainbus0: apid 1 (application processor) > > > > > cpu1: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > > > > cpu1: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > cpu1: 256KB 64b/line 8-way L2 cache > > > > > cpu1: smt 1, core 0, package 0 > > > > > cpu2 at mainbus0: apid 2 (application processor) > > > > > cpu2: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > > > > cpu2: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > cpu2: 256KB 64b/line 8-way L2 cache > > > > > cpu2: smt 0, core 1, package 0 > > > > > cpu3 at mainbus0: apid 3 (application processor) > > > > > cpu3: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > > > > cpu3: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > cpu3: 256KB 64b/line 8-way L2 cache > > > > > cpu3: smt 1, core 1, package 0 > > > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > > > > acpimcfg0 at acpi0 > > > > > acpimcfg0: addr 0xf8000000, bus 0-63 > > > > > acpiec0 at acpi0 > > > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > > > acpiprt1 at acpi0: bus -1 (PEG_) > > > > > acpiprt2 at acpi0: bus 2 (EXP1) > > > > > acpiprt3 at acpi0: bus 3 (EXP2) > > > > > acpiprt4 at acpi0: bus 4 (EXP3) > > > > > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > > > > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > > > > acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > > > > acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > > > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > > > > > acpitz0 at acpi0: critical temperature is 103 degC > > > > > acpibtn0 at acpi0: LID_ > > > > > acpibtn1 at acpi0: SLPB > > > > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > > > > acpicmos0 at acpi0 > > > > > tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e > > > > > acpibat0 at acpi0: BAT0 model "45N1019" serial 33720 type LION oem > > > > > "SANYO" > > > > > acpiac0 at acpi0: AC unit online > > > > > "LEN0078" at acpi0 not configured > > > > > acpithinkpad0 at acpi0: version 1.0 > > > > > "PNP0C14" at acpi0 not configured > > > > > "PNP0C14" at acpi0 not configured > > > > > acpidock0 at acpi0: GDCK not docked (0) > > > > > acpivideo0 at acpi0: VID_ > > > > > acpivout at acpivideo0 not configured > > > > > acpivideo1 at acpi0: VID_ > > > > > cpu0: using VERW MDS workaround (except on vmm entry) > > > > > cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2500, 2400, 2300, 2200, > > > > > 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz > > > > > pci0 at mainbus0 bus 0 > > > > > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > > > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > > > > > drm0 at inteldrm0 > > > > > inteldrm0: msi > > > > > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, > > > > > xHCI 1.0 > > > > > usb0 at xhci0: USB revision 3.0 > > > > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > > > > 3.00/1.00 addr 1 > > > > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > > > > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > > > > > 3c:97:0e:a5:a3:b4 > > > > > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 > > > > > int 16 > > > > > usb1 at ehci0: USB revision 2.0 > > > > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > > > > > 2.00/1.00 addr 1 > > > > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: > > > > > msi > > > > > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > > > > > audio0 at azalia0 > > > > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > > > > > pci1 at ppb0 bus 2 > > > > > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 > > > > > int 16 > > > > > sdhc0: SDHC 3.0, 50 MHz base clock > > > > > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > > > > > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > > > > > pci2 at ppb1 bus 3 > > > > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev > > > > > 0x34: msi, MIMO 2T2R, MoW, address 6c:88:14:81:7b:9c > > > > > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > > > > > pci3 at ppb2 bus 4 > > > > > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 > > > > > int 23 > > > > > usb2 at ehci1: USB revision 2.0 > > > > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > > > > > 2.00/1.00 addr 1 > > > > > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > > > > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, > > > > > AHCI 1.3 > > > > > ahci0: port 0: 6.0Gb/s > > > > > scsibus1 at ahci0: 32 targets > > > > > sd0 at scsibus1 targ 0 lun 0: <ATA, Lexar 256GB SSD, V1.1> > > > > > naa.5000000000000000 > > > > > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > > > > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: > > > > > apic 2 int 18 > > > > > iic0 at ichiic0 > > > > > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > > > > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > > > > isa0 at pcib0 > > > > > isadma0 at isa0 > > > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > > > > pckbd0 at pckbc0 (kbd slot) > > > > > wskbd0 at pckbd0: console keyboard > > > > > pms0 at pckbc0 (aux slot) > > > > > wsmouse0 at pms0 mux 0 > > > > > wsmouse1 at pms0 mux 0 > > > > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 > > > > > pcppi0 at isa0 port 0x61 > > > > > spkr0 at pcppi0 > > > > > vmm0 at mainbus0: VMX/EPT > > > > > efifb at mainbus0 not configured > > > > > umsm0 at uhub0 port 4 configuration 1 interface 0 "Sierra Wireless, > > > > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > > > > ucom0 at umsm0 > > > > > umsm1 at uhub0 port 4 configuration 1 interface 2 "Sierra Wireless, > > > > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > > > > ucom1 at umsm1 > > > > > umsm2 at uhub0 port 4 configuration 1 interface 3 "Sierra Wireless, > > > > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > > > > ucom2 at umsm2 > > > > > umsm3 at uhub0 port 4 configuration 1 interface 12 "Sierra Wireless, > > > > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > > > > umsm3: missing endpoint > > > > > umsm4 at uhub0 port 4 configuration 1 interface 13 "Sierra Wireless, > > > > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > > > > umsm4: missing endpoint > > > > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate > > > > > Matching Hub" rev 2.00/0.00 addr 2 > > > > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate > > > > > Matching Hub" rev 2.00/0.00 addr 2 > > > > > vscsi0 at root > > > > > scsibus2 at vscsi0: 256 targets > > > > > softraid0 at root > > > > > scsibus3 at softraid0: 256 targets > > > > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > > > > > sd1: 244197MB, 512 bytes/sector, 500116577 sectors > > > > > root on sd1a (66cc273e47e15ca3.a) swap on sd1b dump on sd1b > > > > > inteldrm0: 1366x768, 32bpp > > > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using > > > > > wskbd0 > > > > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > > > > > > > usbdevs: > > > > > Controller /dev/usb0: > > > > > addr 01: 8086:0000 Intel, xHCI root hub > > > > > super speed, self powered, config 1, rev 1.00 > > > > > driver: uhub0 > > > > > addr 02: 1199:68a2 Sierra Wireless, Incorporated, MC7700 > > > > > high speed, self powered, config 1, rev 0.06, iSerial > > > > > 012810001060969 > > > > > driver: umsm0 > > > > > driver: umsm1 > > > > > driver: umsm2 > > > > > driver: umsm3 > > > > > Controller /dev/usb1: > > > > > addr 01: 8086:0000 Intel, EHCI root hub > > > > > high speed, self powered, config 1, rev 1.00 > > > > > driver: uhub1 > > > > > addr 02: 8087:0024 Intel, Rate Matching Hub > > > > > high speed, self powered, config 1, rev 0.00 > > > > > driver: uhub3 > > > > > Controller /dev/usb2: > > > > > addr 01: 8086:0000 Intel, EHCI root hub > > > > > high speed, self powered, config 1, rev 1.00 > > > > > driver: uhub2 > > > > > addr 02: 8087:0024 Intel, Rate Matching Hub > > > > > high speed, self powered, config 1, rev 0.00 > > > > > driver: uhub4 > > > > > > > > > > > > > > > > > > > > >
