Alright, I'll give it a try this weekend. Is there another bug with the USB stack? When this crashes, the keyboard stops working, but it works fine during the install and at boot. I get the same issue with the keyboard not working when I use -c for boot config. I've tried multiple keyboards in each USB port and nothing works.
On Thu, Jun 17, 2021 at 2:34 AM Mark Kettenis <[email protected]> wrote: > > Date: Wed, 16 Jun 2021 23:52:47 -0400 > > From: Brad Smith <[email protected]> > > > > On Wed, Jun 16, 2021 at 07:46:03PM -0700, Evan Littmann wrote: > > > I'll see if I have an adapter that works. > > > > > > I took a photo of the screen and ran it through an online optical > character > > > recognition site so I didn't have to fix or type much. > > > > > > On Mon, Jun 14, 2021, 1:29 PM Stuart Henderson <[email protected]> > wrote: > > > > > > > On 2021/06/14 20:32, Mark Kettenis wrote: > > > > > > From: Evan Littmann <[email protected]> > > > > > > Date: Sun, 13 Jun 2021 17:28:50 -0700 > > > > > > > > > > > > Hello, > > > > > > > > > > > > I am using OpenBSD 6.9 on an HP EliteDesk 705 G1 desktop mini > and it > > > > can't > > > > > > boot after install due to a panic in mii_phy_setmedia related to > the > > > > bge > > > > > > driver which might be related to this bug > > > > > > > > > > > http://openbsd-archive.7691.n7.nabble.com/possible-bug-in-mii-physubr-c-with-Broadcom-BCM57780-td162423.html > > > > . > > > > > > The full hardware list of this machine is at > > > > > > https://support.hp.com/bg-en/document/c04424260. > > > > > > > > > > > > It boots from a USB thumb drive and installs to disk using the > > > > Broadcom NIC > > > > > > to grab the sets over http, but there is an error while booting > the > > > > normal > > > > > > kernel. I can't use ddb as the keyboard doesn't work after the > crash. I > > > > > > have tried many keyboards in each of the USB ports and none of > them > > > > work. > > > > > > It boots from bsd.rd. > > > > > > > > > > > > I have tried changing the BIOS network adapter settings including > > > > changing > > > > > > autonegotiation and nothing affects this crash. > > > > > > > > > > Not much we can do without a full dmesg unfortunately. > > > > > > > > One way to get that would be to use a USB ethernet adapter and avoid > > > > configuring network on the bge interface when installing. > > > > > > > > > > This is the message: > > > > > > pf enabled > > > > > > starting network > > > > > > panic: mii_phy_setmedia > > > > > > Stopped at db_enter+0x10: popq %rbp > > > > > > TID P UID PRFLAGS PFLAGS CPU COMMAND > > > > > > *390667 43405 0 0x3 0 0K ifconfig > > > > > > db_enter() at db_enter+0x10 > > > > > > panic(ffffffff81e3ccaf) at panic+0x12a > > > > > > mii_phy_setmedia(ffff80000017e800) at mii_phy_setmedia+0x154 > > > > > > ukphy.service(ffff80000017e800,ffff800000465730,2) at > > > > ukphy_service+0x69 > > > > > > mii_mediachg(ffff800000465730) at mii_mediachg+0x58 > > > > > > bge_stop(ffff800000465000,0) at bge_stop+0xc29 > > > > > > bge_init(ffff800000465000) at bge_init+0x2a > > > > > > bge_ioctl(ffff800000465048,8020690c,ffff800000a91900) at > > > > bge_ioctl+0x2d5 > > > > > > in_ifinit(ffff800000465048,ffff800000a91900,ffff800023797410,1) > at > > > > > > in_ifinit+0xf3 > > > > > > > in_ioctl_change_ifaddr(8040691a,ffff800023797400,ffff800000465048,1) at > > > > > > in_ioctl_change_ifaddr+0x385 > > > > > > in_ioctl(8040691a,ffff800023797400,ffff800000465048,1) at > in_ioctl+0xfb > > > > > > > ifioctl(fffffd81f70c3008,8040691a,ffff800023797400,ffff8000237b6d28) at > > > > > > ifioctl+0xa2d > > > > > > > soo_ioctl(fffffd8218c77870,8040691a,ffff800023797400,ffff8000237b6d28) > > > > at > > > > > > soo_ioctl+0x171 > > > > > > sys_ioctl(ffff8000237b6d28,ffff800023797510,ffff800023797570) at > > > > > > sys_ioctI+0x2d4 end trace frame: 0xffff8000237975d0, count: 0 > > > > > > https://www.openbsd.orgiddb.html describes the minimum info > required > > > > in bug > > > > > > reports. Insufficient info makes it difficult to find and fix > bugs. > > > > > > ddb{0}> > > > > > > > > Thanks for sending that as text rather than just a photo :) > > > > I asked Evan to look at dmesg output booting from USB. He said it was > > as shown below. I was looking for something else and ran into the thread > > below which is the same system. > > > > https://marc.info/?t=153427141100002&r=1&w=2 > > > > For a full dmesg. > > > > https://marc.info/?l=openbsd-bugs&m=154341077015782&q=p3 > > > > ukphy0 at bge0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI > 0x180361, model 0x0038 > > > > The BCM5762 PHY needs to be added to miidevs and brgphy(4). > > Committed a slight variant of this, so Evan, feel free to try a > snapshots in a day or two. > > > > Index: miidevs > > =================================================================== > > RCS file: /home/cvs/src/sys/dev/mii/miidevs,v > > retrieving revision 1.129 > > diff -u -p -u -p -r1.129 miidevs > > --- miidevs 14 Apr 2020 20:57:22 -0000 1.129 > > +++ miidevs 14 Jun 2021 05:17:06 -0000 > > @@ -167,6 +167,7 @@ model xxBROADCOM3 BCM5719C 0x0022 BCM571 > > model xxBROADCOM3 BCM57765 0x0024 BCM57765 10/100/1000baseT PHY > > model xxBROADCOM3 BCM5720C 0x0036 BCM5720C 10/100/1000baseT PHY > > model xxBROADCOM4 BCM54210E 0x000a BCM54210E 10/100/1000baseT PHY > > +model xxBROADCOM4 BCM5762 0x0038 BCM5762 10/100/1000baseT PHY > > model BROADCOM BCM5400 0x0004 BCM5400 1000baseT PHY > > model BROADCOM BCM5401 0x0005 BCM5401 1000baseT PHY > > model BROADCOM BCM5411 0x0007 BCM5411 1000baseT PHY > > Index: brgphy.c > > =================================================================== > > RCS file: /home/cvs/src/sys/dev/mii/brgphy.c,v > > retrieving revision 1.106 > > diff -u -p -u -p -r1.106 brgphy.c > > --- brgphy.c 14 Apr 2020 21:00:27 -0000 1.106 > > +++ brgphy.c 14 Jun 2021 05:19:56 -0000 > > @@ -183,6 +183,8 @@ static const struct mii_phydesc brgphys[ > > MII_STR_xxBROADCOM3_BCM57780 }, > > { MII_OUI_xxBROADCOM4, MII_MODEL_xxBROADCOM4_BCM54210E, > > MII_STR_xxBROADCOM4_BCM54210E }, > > + { MII_OUI_xxBROADCOM4, MII_MODEL_xxBROADCOM4_BCM5762, > > + MII_STR_xxBROADCOM4_BCM5762 }, > > { MII_OUI_BROADCOM2, MII_MODEL_BROADCOM2_BCM5906, > > MII_STR_BROADCOM2_BCM5906 }, > > > > >
