Brad,
Works great! Here's the full dmesg:
OpenBSD 6.9 (RAMDISK_CD) #456: Mon Apr 19 10:47:37 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 7480295424 (7133MB)
avail mem = 7249567744 (6913MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe87a8 (49 entries)
bios0: vendor Hewlett-Packard version "L06 v02.31" date 08/31/2018
bios0: Hewlett-Packard HP EliteDesk 705 G1 DM
acpi0 at bios0: ACPI 5.0
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SLIC MSDM TCPA IVRS
SSDT SSDT CRAT SSDT SSDT WPBT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD A8 PRO-7600B R7, 10 Compute Cores 4C+6G, 3094.63 MHz, 15-30-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,IBPB,XSAVEOPT
cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
64b/line 16-way L2 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully
associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully
associative
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB21)
acpiprt2 at acpi0: bus -1 (PB22)
acpiprt3 at acpi0: bus -1 (PB31)
acpiprt4 at acpi0: bus -1 (PB32)
acpiprt5 at acpi0: bus -1 (PB33)
acpiprt6 at acpi0: bus -1 (PB34)
acpiprt7 at acpi0: bus 1 (P0PC)
acpiprt8 at acpi0: bus 2 (PE20)
acpiprt9 at acpi0: bus -1 (PE21)
acpiprt10 at acpi0: bus 3 (PE22)
acpiprt11 at acpi0: bus -1 (PE23)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"AMDC003" at acpi0 not configured
"IFX0102" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD 15h Root Complex" rev 0x00
"AMD 15h IOMMU" rev 0x00 at pci0 dev 0 function 2 not configured
"ATI Kaveri Radeon R7" rev 0x00 at pci0 dev 1 function 0 not configured
"ATI Kaveri HD Audio" rev 0x00 at pci0 dev 1 function 1 not configured
pchb1 at pci0 dev 2 function 0 "AMD 15h PCIE" rev 0x00
pchb2 at pci0 dev 3 function 0 "AMD 15h PCIE" rev 0x00
pchb3 at pci0 dev 4 function 0 "AMD 15h PCIE" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
addr 1
xhci1 at pci0 dev 16 function 1 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HGST HTS725050A7, GS2O>
naa.5000cca85edab1da
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb2 at ehci0: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb3 at ehci1: USB revision 2.0
uhub3 at usb3 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
addr 1
"AMD Hudson-2 SMBus" rev 0x16 at pci0 dev 20 function 0 not configured
"AMD Hudson-2 HD Audio" rev 0x01 at pci0 dev 20 function 2 not configured
"AMD Hudson-2 LPC" rev 0x11 at pci0 dev 20 function 3 not configured
ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci1 at ppb0 bus 1
ohci2 at pci0 dev 20 function 5 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
version 1.0, legacy support
ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel AC 7260" rev 0x6b, msi
ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5762" rev 0x10, unknown BCM5762
(0x5762100): msi, address ec:b1:d7:57:e4:83
ukphy0 at bge0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x180361, model 0x0038
pchb4 at pci0 dev 24 function 0 "AMD 15h Link Cfg" rev 0x00
pchb5 at pci0 dev 24 function 1 "AMD 15h Address Map" rev 0x00
pchb6 at pci0 dev 24 function 2 "AMD 15h DRAM Cfg" rev 0x00
pchb7 at pci0 dev 24 function 3 "AMD 15h Misc Cfg" rev 0x00
pchb8 at pci0 dev 24 function 4 "AMD 15h CPU Power" rev 0x00
pchb9 at pci0 dev 24 function 5 "AMD 15h Misc Cfg" rev 0x00
usb4 at ohci0: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
usb5 at ohci1: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
usb6 at ohci2: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 800x600, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
umass0 at uhub1 port 3 configuration 1 interface 0 "Imation Clip" rev
2.00/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Imation, Clip, PMAP> removable
serial.071804940D03FDD00003
sd1: 7644MB, 512 bytes/sector, 15654912 sectors
umass1 at uhub1 port 4 configuration 1 interface 0 "vendor 0x0fe6 USB 2.0
10/100M Ethernet Adaptor" rev 1.10/1.01 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <, Supereal VR DISK, 1.00> removable
"vendor 0x0fe6 USB 2.0 10/100M Ethernet Adaptor" rev 1.10/1.01 addr 3 at
uhub1 port 4 configuration 1 not configured
uhub7 at uhub4 port 1 configuration 1 interface 0 " USB Hub 2.0" rev
2.00/7.02 addr 2
uhidev0 at uhub7 port 3 configuration 1 interface 0 "SIGMACHIP USB
Keyboard" rev 1.10/1.10 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 3 configuration 1 interface 1 "SIGMACHIP USB
Keyboard" rev 1.10/1.10 addr 3
uhidev1: iclass 3/0, 2 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhidev2 at uhub7 port 4 configuration 1 interface 0 "vendor 0x1bcf USB
Optical Mouse" rev 2.00/0.14 addr 4
uhidev2: iclass 3/1, 1 report id
uhid at uhidev2 reportid 1 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
iwm0: could not read firmware iwm-7260-17 (error 2)
iwm0: failed to load init firmware
WARNING: / was not properly unmounted
syncing disks...
OpenBSD 6.9-current (GENERIC.MP) #82: Sat Jun 19 07:05:12 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 7480295424 (7133MB)
avail mem = 7238107136 (6902MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe87a8 (49 entries)
bios0: vendor Hewlett-Packard version "L06 v02.31" date 08/31/2018
bios0: Hewlett-Packard HP EliteDesk 705 G1 DM
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SLIC MSDM TCPA IVRS
SSDT SSDT CRAT SSDT SSDT
acpi0: wakeup devices X16K(S4) X04K(S4) SBAZ(S4) PS2K(S3) PS2M(S3) ECIR(S4)
P0PC(S4) X11_(S4) LOM_(S4) X12_(S4) BNIC(S4) OHC1(S3) EHC1(S3) OHC2(S3)
EHC2(S3) OHC3(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD A8 PRO-7600B R7, 10 Compute Cores 4C+6G, 3094.62 MHz, 15-30-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,IBPB,XSAVEOPT
cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
64b/line 16-way L2 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully
associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully
associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 17 (application processor)
cpu1: AMD A8 PRO-7600B R7, 10 Compute Cores 4C+6G, 3094.23 MHz, 15-30-01
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,IBPB,XSAVEOPT
cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
64b/line 16-way L2 cache
cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully
associative
cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully
associative
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: AMD A8 PRO-7600B R7, 10 Compute Cores 4C+6G, 3094.24 MHz, 15-30-01
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,IBPB,XSAVEOPT
cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
64b/line 16-way L2 cache
cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully
associative
cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully
associative
cpu2: disabling user TSC (skew=320)
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 19 (application processor)
cpu3: AMD A8 PRO-7600B R7, 10 Compute Cores 4C+6G, 3094.24 MHz, 15-30-01
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,IBPB,XSAVEOPT
cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
64b/line 16-way L2 cache
cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully
associative
cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully
associative
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB21)
acpiprt2 at acpi0: bus -1 (PB22)
acpiprt3 at acpi0: bus -1 (PB31)
acpiprt4 at acpi0: bus -1 (PB32)
acpiprt5 at acpi0: bus -1 (PB33)
acpiprt6 at acpi0: bus -1 (PB34)
acpiprt7 at acpi0: bus 1 (P0PC)
acpiprt8 at acpi0: bus 2 (PE20)
acpiprt9 at acpi0: bus -1 (PE21)
acpiprt10 at acpi0: bus 3 (PE22)
acpiprt11 at acpi0: bus -1 (PE23)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"AMDC003" at acpi0 not configured
tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x001a15d1 rev 0x10
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 3094 MHz: speeds: 3100 2800 2400 1900 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD 15h Root Complex" rev 0x00
"AMD 15h IOMMU" rev 0x00 at pci0 dev 0 function 2 not configured
radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R7" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 "AMD 15h PCIE" rev 0x00
pchb2 at pci0 dev 3 function 0 "AMD 15h PCIE" rev 0x00
pchb3 at pci0 dev 4 function 0 "AMD 15h PCIE" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
addr 1
xhci1 at pci0 dev 16 function 1 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS725050A7, GS2O>
naa.5000cca85edab1da
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb2 at ehci0: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb3 at ehci1: USB revision 2.0
uhub3 at usb3 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: apic 0
int 16
azalia1: codecs: Realtek ALC221
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci1 at ppb0 bus 1
ohci2 at pci0 dev 20 function 5 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
version 1.0, legacy support
ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel AC 7260" rev 0x6b, msi
ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5762" rev 0x10, BCM5762 B0
(0x5762100): msi, address ec:b1:d7:57:e4:83
brgphy0 at bge0 phy 1: BCM5725 10/100/1000baseT PHY, rev. 0
pchb4 at pci0 dev 24 function 0 "AMD 15h Link Cfg" rev 0x00
pchb5 at pci0 dev 24 function 1 "AMD 15h Address Map" rev 0x00
pchb6 at pci0 dev 24 function 2 "AMD 15h DRAM Cfg" rev 0x00
pchb7 at pci0 dev 24 function 3 "AMD 15h Misc Cfg" rev 0x00
pchb8 at pci0 dev 24 function 4 "AMD 15h CPU Power" rev 0x00
pchb9 at pci0 dev 24 function 5 "AMD 15h Misc Cfg" rev 0x00
usb4 at ohci0: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
usb5 at ohci1: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb6 at ohci2: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
efifb at mainbus0 not configured
dt: 445 probes
umass0 at uhub1 port 4 configuration 1 interface 0 "Unknown Vendor USB 2.0
10/100M Ethernet Adaptor" rev 1.10/1.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <, Supereal VR DISK, 1.00> removable
ugen0 at uhub1 port 4 configuration 1 "Unknown Vendor USB 2.0 10/100M
Ethernet Adaptor" rev 1.10/1.01 addr 2
uhub7 at uhub4 port 1 configuration 1 interface 0 " USB Hub 2.0" rev
2.00/7.02 addr 2
uhidev0 at uhub7 port 3 configuration 1 interface 0 "SIGMACHIP USB
Keyboard" rev 1.10/1.10 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub7 port 3 configuration 1 interface 1 "SIGMACHIP USB
Keyboard" rev 1.10/1.10 addr 3
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub7 port 4 configuration 1 interface 0 "Sunplus USB Optical
Mouse" rev 2.00/0.14 addr 4
uhidev2: iclass 3/1, 1 report id
ums0 at uhidev2 reportid 1: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (0a337ddb51ae1fc9.a) swap on sd0b dump on sd0b
radeondrm0: KAVERI
cik_cp: Failed to load firmware "radeon/KAVERI_pfp.bin"
[drm] *ERROR* Failed to load firmware!
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
efifb0 at mainbus0: 800x600, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: could not read firmware iwm-7260-17 (error 2)
iwm0: failed to load init firmware
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
wsmouse0 detached
ums0 detached
uhidev2 detached
uhub7 detached
uhub7 at uhub4 port 1 configuration 1 interface 0 " USB Hub 2.0" rev
2.00/7.02 addr 2
uhidev0 at uhub7 port 3 configuration 1 interface 0 "SIGMACHIP USB
Keyboard" rev 1.10/1.10 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 3 configuration 1 interface 1 "SIGMACHIP USB
Keyboard" rev 1.10/1.10 addr 3
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub7 port 4 configuration 1 interface 0 "Sunplus USB Optical
Mouse" rev 2.00/0.14 addr 4
uhidev2: iclass 3/1, 1 report id
ums0 at uhidev2 reportid 1: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
On Sun, Jun 20, 2021 at 12:25 AM Brad Smith <[email protected]> wrote:
> On 6/18/2021 2:02 AM, Brad Smith wrote:
> > On Wed, Jun 16, 2021 at 11:52:48PM -0400, Brad Smith wrote:
> >> On Wed, Jun 16, 2021 at 07:46:03PM -0700, Evan Littmann wrote:
> >>> I'll see if I have an adapter that works.
> >>>
> >>> I took a photo of the screen and ran it through an online optical
> character
> >>> recognition site so I didn't have to fix or type much.
> >>>
> >>> On Mon, Jun 14, 2021, 1:29 PM Stuart Henderson <[email protected]>
> wrote:
> >>>
> >>>> On 2021/06/14 20:32, Mark Kettenis wrote:
> >>>>>> From: Evan Littmann <[email protected]>
> >>>>>> Date: Sun, 13 Jun 2021 17:28:50 -0700
> >>>>>>
> >>>>>> Hello,
> >>>>>>
> >>>>>> I am using OpenBSD 6.9 on an HP EliteDesk 705 G1 desktop mini and it
> >>>> can't
> >>>>>> boot after install due to a panic in mii_phy_setmedia related to the
> >>>> bge
> >>>>>> driver which might be related to this bug
> >>>>>>
> >>>>
> http://openbsd-archive.7691.n7.nabble.com/possible-bug-in-mii-physubr-c-with-Broadcom-BCM57780-td162423.html
> >>>> .
> >>>>>> The full hardware list of this machine is at
> >>>>>> https://support.hp.com/bg-en/document/c04424260.
> >>>>>>
> >>>>>> It boots from a USB thumb drive and installs to disk using the
> >>>> Broadcom NIC
> >>>>>> to grab the sets over http, but there is an error while booting the
> >>>> normal
> >>>>>> kernel. I can't use ddb as the keyboard doesn't work after the
> crash. I
> >>>>>> have tried many keyboards in each of the USB ports and none of them
> >>>> work.
> >>>>>> It boots from bsd.rd.
> >>>>>>
> >>>>>> I have tried changing the BIOS network adapter settings including
> >>>> changing
> >>>>>> autonegotiation and nothing affects this crash.
> >>>>> Not much we can do without a full dmesg unfortunately.
> >>>> One way to get that would be to use a USB ethernet adapter and avoid
> >>>> configuring network on the bge interface when installing.
> >>>>
> >>>>>> This is the message:
> >>>>>> pf enabled
> >>>>>> starting network
> >>>>>> panic: mii_phy_setmedia
> >>>>>> Stopped at db_enter+0x10: popq %rbp
> >>>>>> TID P UID PRFLAGS PFLAGS CPU COMMAND
> >>>>>> *390667 43405 0 0x3 0 0K ifconfig
> >>>>>> db_enter() at db_enter+0x10
> >>>>>> panic(ffffffff81e3ccaf) at panic+0x12a
> >>>>>> mii_phy_setmedia(ffff80000017e800) at mii_phy_setmedia+0x154
> >>>>>> ukphy.service(ffff80000017e800,ffff800000465730,2) at
> >>>> ukphy_service+0x69
> >>>>>> mii_mediachg(ffff800000465730) at mii_mediachg+0x58
> >>>>>> bge_stop(ffff800000465000,0) at bge_stop+0xc29
> >>>>>> bge_init(ffff800000465000) at bge_init+0x2a
> >>>>>> bge_ioctl(ffff800000465048,8020690c,ffff800000a91900) at
> >>>> bge_ioctl+0x2d5
> >>>>>> in_ifinit(ffff800000465048,ffff800000a91900,ffff800023797410,1) at
> >>>>>> in_ifinit+0xf3
> >>>>>>
> in_ioctl_change_ifaddr(8040691a,ffff800023797400,ffff800000465048,1) at
> >>>>>> in_ioctl_change_ifaddr+0x385
> >>>>>> in_ioctl(8040691a,ffff800023797400,ffff800000465048,1) at
> in_ioctl+0xfb
> >>>>>>
> ifioctl(fffffd81f70c3008,8040691a,ffff800023797400,ffff8000237b6d28) at
> >>>>>> ifioctl+0xa2d
> >>>>>>
> soo_ioctl(fffffd8218c77870,8040691a,ffff800023797400,ffff8000237b6d28)
> >>>> at
> >>>>>> soo_ioctl+0x171
> >>>>>> sys_ioctl(ffff8000237b6d28,ffff800023797510,ffff800023797570) at
> >>>>>> sys_ioctI+0x2d4 end trace frame: 0xffff8000237975d0, count: 0
> >>>>>> https://www.openbsd.orgiddb.html describes the minimum info
> required
> >>>> in bug
> >>>>>> reports. Insufficient info makes it difficult to find and fix bugs.
> >>>>>> ddb{0}>
> >>>> Thanks for sending that as text rather than just a photo :)
> >> I asked Evan to look at dmesg output booting from USB. He said it was
> >> as shown below. I was looking for something else and ran into the thread
> >> below which is the same system.
> >>
> >> https://marc.info/?t=153427141100002&r=1&w=2
> >>
> >> For a full dmesg.
> >>
> >> https://marc.info/?l=openbsd-bugs&m=154341077015782&q=p3
> >>
> >> ukphy0 at bge0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
> 0x180361, model 0x0038
> >>
> >> The BCM5762 PHY needs to be added to miidevs and brgphy(4).
> > Also recognize the BCM5762 rev.
> >
> > unknown BCM5762 (0x5762100)
>
>
> Evan,
>
> https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/
>
> You should be able to install the latest snapshot and have
> the bge(4) NIC fully recognized and working. I'd love to hear
> back after testing. The list and others would probably value
> you posting a -current dmesg with the hardware.
>
