>Synopsis: Xorg segmentation fault
>Category: amd64
>Environment:
System : OpenBSD 7.0
Details : OpenBSD 7.0-current (GENERIC.MP) #87: Wed Nov 10 10:29:31
MST 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
>Description:
I believe I noticed the graphical interface stutter or slow down
during mouse movement just before the crash. The X server
crashed (see log below), dropping into the console for a moment
and then displaying the xenodm login screen.
>How-To-Repeat:
I don't know how to repeat it. The crash seemed to happen during
normal system use: running graphical programs, with a monitor
attached, during mouse cursor movement, but has not repeated
itself yet. Let me know if there's something I can do to try to
make this repeatable.
Someone else got this on different hardware, also amd64, see
https://marc.info/?l=openbsd-misc&m=163673726428574&w=2
Xorg.0.log.old:
[ 29.449] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 29.449] linear framebuffer access unavailable
[ 29.479] (--) Using wscons driver on /dev/ttyC4
[ 29.498]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 29.498] Build Operating System: OpenBSD 7.0 amd64
[ 29.498] Current Operating System: OpenBSD puffy.lan 7.0 GENERIC.MP#87 amd64
[ 29.498] Build Date: 10 November 2021 10:46:38AM
[ 29.498]
[ 29.498] Current version of pixman: 0.40.0
[ 29.498] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29.498] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29.499] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 10 16:56:02
2021
[ 29.500] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 29.500] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 29.505] (==) No Layout section. Using the first Screen section.
[ 29.505] (==) No screen section available. Using defaults.
[ 29.505] (**) |-->Screen "Default Screen Section" (0)
[ 29.505] (**) | |-->Monitor "<default monitor>"
[ 29.507] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 29.507] (**) | |-->Device "Intel Graphics"
[ 29.507] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 29.507] (==) Automatically adding devices
[ 29.507] (==) Automatically enabling devices
[ 29.507] (==) Not automatically adding GPU devices
[ 29.507] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 29.508] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 29.508] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 29.508] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 29.508] (II) Loader magic: 0x7ab32fdfeb0
[ 29.508] (II) Module ABI versions:
[ 29.508] X.Org ANSI C Emulation: 0.4
[ 29.508] X.Org Video Driver: 24.1
[ 29.508] X.Org XInput driver : 24.1
[ 29.508] X.Org Server Extension : 10.0
[ 29.509] (--) PCI:*(0@0:2:0) 8086:1916:17aa:5053 rev 7, Mem @
0xe0000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64
[ 29.509] (II) LoadModule: "glx"
[ 29.510] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 29.553] (II) Module glx: vendor="X.Org Foundation"
[ 29.553] compiled for 1.20.13, module version = 1.0.0
[ 29.553] ABI class: X.Org Server Extension, version 10.0
[ 29.553] (II) LoadModule: "intel"
[ 29.554] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 29.564] (II) Module intel: vendor="X.Org Foundation"
[ 29.565] compiled for 1.20.13, module version = 2.99.916
[ 29.565] Module class: X.Org Video Driver
[ 29.565] ABI class: X.Org Video Driver, version 24.1
[ 29.565] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 29.565] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 29.565] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 29.565] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200,
P6300
[ 29.587] (II) intel(0): Using Kernel Mode Setting driver: i915, version
1.6.0 20200917
[ 29.589] (WW) intel(0): Unknown chipset
[ 29.589] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2,
avx, avx2
[ 29.589] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.589] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 29.590] (==) intel(0): RGB weight 888
[ 29.590] (==) intel(0): Default visual is TrueColor
[ 29.590] (**) intel(0): Option "TearFree" "true"
[ 29.594] (II) intel(0): Output eDP1 has no monitor section
[ 29.597] (--) intel(0): Found backlight control interface wscons (type
'platform') for output eDP1
[ 29.597] (II) intel(0): Enabled output eDP1
[ 29.597] (II) intel(0): Output DP1 has no monitor section
[ 29.597] (II) intel(0): Enabled output DP1
[ 29.597] (II) intel(0): Output HDMI1 has no monitor section
[ 29.597] (II) intel(0): Enabled output HDMI1
[ 29.597] (II) intel(0): Output DP2 has no monitor section
[ 29.597] (II) intel(0): Enabled output DP2
[ 29.598] (II) intel(0): Output HDMI2 has no monitor section
[ 29.598] (II) intel(0): Enabled output HDMI2
[ 29.598] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 29.598] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 29.598] (II) intel(0): Enabled output VIRTUAL1
[ 29.598] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 29.601] (**) intel(0): TearFree enabled
[ 29.601] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 29.601] (==) intel(0): DPI set to (96, 96)
[ 29.601] (II) Loading sub module "dri3"
[ 29.601] (II) LoadModule: "dri3"
[ 29.601] (II) Module "dri3" already built-in
[ 29.601] (II) Loading sub module "dri2"
[ 29.601] (II) LoadModule: "dri2"
[ 29.601] (II) Module "dri2" already built-in
[ 29.601] (II) Loading sub module "present"
[ 29.601] (II) LoadModule: "present"
[ 29.601] (II) Module "present" already built-in
[ 29.611] (II) intel(0): SNA initialized with generic backend
[ 29.611] (==) intel(0): Backing store enabled
[ 29.611] (==) intel(0): Silken mouse enabled
[ 29.616] (II) intel(0): HW Cursor enabled
[ 29.634] (==) intel(0): DPMS enabled
[ 29.641] (II) intel(0): Textured video not supported on this hardware
[ 29.642] (II) intel(0): [DRI2] Setup complete
[ 29.642] (II) intel(0): [DRI2] DRI driver: i965
[ 29.642] (II) intel(0): [DRI2] VDPAU driver: i965
[ 29.645] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 29.648] (II) intel(0): hardware support for Present enabled
[ 29.649] (II) Initializing extension Generic Event Extension
[ 29.652] (II) Initializing extension SHAPE
[ 29.653] (II) Initializing extension MIT-SHM
[ 29.653] (II) Initializing extension XInputExtension
[ 29.659] (II) Initializing extension XTEST
[ 29.660] (II) Initializing extension BIG-REQUESTS
[ 29.660] (II) Initializing extension SYNC
[ 29.661] (II) Initializing extension XKEYBOARD
[ 29.665] (II) Initializing extension XC-MISC
[ 29.665] (II) Initializing extension SECURITY
[ 29.666] (II) Initializing extension XFIXES
[ 29.666] (II) Initializing extension RENDER
[ 29.667] (II) Initializing extension RANDR
[ 29.668] (II) Initializing extension COMPOSITE
[ 29.669] (II) Initializing extension DAMAGE
[ 29.670] (II) Initializing extension MIT-SCREEN-SAVER
[ 29.671] (II) Initializing extension DOUBLE-BUFFER
[ 29.672] (II) Initializing extension RECORD
[ 29.673] (II) Initializing extension DPMS
[ 29.673] (II) Initializing extension Present
[ 29.674] (II) Initializing extension DRI3
[ 29.676] (II) Initializing extension X-Resource
[ 29.677] (II) Initializing extension XVideo
[ 29.677] (II) Initializing extension XVideo-MotionCompensation
[ 29.677] (II) Initializing extension GLX
[ 29.811] (II) AIGLX: Loaded and initialized i965
[ 29.811] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 29.811] (II) Initializing extension XFree86-VidModeExtension
[ 29.811] (II) Initializing extension XFree86-DGA
[ 29.812] (II) Initializing extension XFree86-DRI
[ 29.812] (II) Initializing extension DRI2
[ 29.830] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 29.853] (II) intel(0): Setting screen physical size to 508 x 285
[ 30.005] (II) config/wscons: checking input device /dev/wskbd
[ 30.005] (II) wskbd: using layout us
[ 30.005] (II) wskbd: using variant dvorak
[ 30.006] (II) LoadModule: "kbd"
[ 30.007] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 30.010] (II) Module kbd: vendor="X.Org Foundation"
[ 30.010] compiled for 1.20.13, module version = 1.9.0
[ 30.010] Module class: X.Org XInput Driver
[ 30.010] ABI class: X.Org XInput driver, version 24.1
[ 30.010] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 30.010] (**) /dev/wskbd: always reports core events
[ 30.010] (**) /dev/wskbd: always reports core events
[ 30.010] (**) Option "Protocol" "standard"
[ 30.010] (**) Option "XkbRules" "base"
[ 30.010] (**) Option "XkbModel" "pc105"
[ 30.010] (**) Option "XkbLayout" "us"
[ 30.010] (**) Option "XkbVariant" "dvorak"
[ 30.010] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 30.539] (II) config/wscons: checking input device /dev/wsmouse0
[ 30.539] (II) LoadModule: "ws"
[ 30.540] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 30.543] (II) Module ws: vendor="X.Org Foundation"
[ 30.543] compiled for 1.20.13, module version = 1.3.0
[ 30.543] Module class: X.Org XInput Driver
[ 30.543] ABI class: X.Org XInput driver, version 24.1
[ 30.543] (II) Using input driver 'ws' for '/dev/wsmouse0'
[ 30.543] (**) /dev/wsmouse0: always reports core events
[ 30.543] (II) ws: /dev/wsmouse0: debuglevel 0
[ 30.543] (**) Option "Device" "/dev/wsmouse0"
[ 30.543] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[ 30.543] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[ 30.543] (**) ws: /dev/wsmouse0: associated screen: 0
[ 31.020] (II) ws: /dev/wsmouse0: minimum x position: 0
[ 31.020] (II) ws: /dev/wsmouse0: maximum x position: 1919
[ 31.020] (II) ws: /dev/wsmouse0: minimum y position: 0
[ 31.020] (II) ws: /dev/wsmouse0: maximum y position: 1079
[ 31.020] (==) ws: /dev/wsmouse0: Buttons: 7
[ 31.023] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[ 31.023] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type:
MOUSE, id 7)
[ 31.504] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 31.504] (**) /dev/wsmouse0: (accel) acceleration profile 0
[ 31.504] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 31.504] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 31.505] (II) config/wscons: checking input device /dev/wsmouse
[ 31.505] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 31.505] (**) /dev/wsmouse: always reports core events
[ 31.505] (II) ws: /dev/wsmouse: debuglevel 0
[ 31.505] (**) Option "Device" "/dev/wsmouse"
[ 31.505] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 31.505] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 31.505] (**) ws: /dev/wsmouse: associated screen: 0
[ 31.505] (II) ws: /dev/wsmouse: minimum x position: 0
[ 31.505] (II) ws: /dev/wsmouse: maximum x position: 1919
[ 31.505] (II) ws: /dev/wsmouse: minimum y position: 0
[ 31.505] (II) ws: /dev/wsmouse: maximum y position: 1079
[ 31.505] (==) ws: /dev/wsmouse: Buttons: 7
[ 31.505] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 31.505] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 8)
[ 31.505] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 31.505] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 31.505] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 31.505] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 42.955] (II) intel(0): EDID vendor "LGD", prod id 1188
[ 42.955] (II) intel(0): Printing DDC gathered Modelines:
[ 42.955] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000
2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[ 20106.771] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 54833.363] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 54833.363] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 56862.470] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 74608.393] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 74608.393] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 76464.643] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 77504.382] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 77504.382] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 78664.982] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 79770.390] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 79770.390] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 82471.995] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 87282.375] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 87282.375] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 91486.198] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 91658.372] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 91658.372] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 93061.844] (II) AIGLX: Suspending AIGLX clients for VT switch
[145914.364] (II) AIGLX: Resuming AIGLX clients after VT switch
[145914.364] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[151546.942] (II) AIGLX: Suspending AIGLX clients for VT switch
[152052.388] (II) AIGLX: Resuming AIGLX clients after VT switch
[152052.388] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[161010.030] (II) AIGLX: Suspending AIGLX clients for VT switch
[161684.382] (II) AIGLX: Resuming AIGLX clients after VT switch
[161684.382] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[162545.342] (II) AIGLX: Suspending AIGLX clients for VT switch
[176562.141] (II) AIGLX: Resuming AIGLX clients after VT switch
[176562.141] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[176591.033] (--) intel(0): HDMI max TMDS frequency 300000KHz
[176593.237] (--) intel(0): HDMI max TMDS frequency 300000KHz
[176683.203] (II) intel(0): resizing framebuffer to 3840x2160
[176683.327] (II) intel(0): switch to mode [email protected] on HDMI2 using pipe
1, position (0, 0), rotation normal, reflection none
[176685.963] (--) intel(0): HDMI max TMDS frequency 300000KHz
[176690.712] (--) intel(0): HDMI max TMDS frequency 300000KHz
[176692.916] (--) intel(0): HDMI max TMDS frequency 300000KHz
[176812.207] (--) intel(0): HDMI max TMDS frequency 300000KHz
[177897.922] (EE) Segmentation fault at address 0x7ae0ca1f008
[177897.922] (EE)
Fatal server error:
[177897.922] (EE) Caught signal 11 (Segmentation fault). Server aborting
[177897.922] (EE)
[177897.922] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[177897.922] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[177897.922] (EE)
[177897.922] (EE) ws: /dev/wsmouse0: unknown command 4
[177897.922] (EE) ws: /dev/wsmouse: unknown command 4
[177897.922] (II) AIGLX: Suspending AIGLX clients for VT switch
dmesg:
OpenBSD 7.0-current (GENERIC.MP) #87: Wed Nov 10 10:29:31 MST 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12717174784 (12128MB)
avail mem = 12315713536 (11745MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xb707e000 (65 entries)
bios0: vendor LENOVO version "R06ET49W (1.23 )" date 03/17/2017
bios0: LENOVO 20FNCTO1WW
acpi0 at bios0
acpi0: BGRT checksum error: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA SSDT SSDT TPM2 UEFI SSDT SSDT ECDT HPET APIC MCFG
SSDT DBGP DBG2 BOOT BATB SSDT SSDT MSDM DMAR ASF! FPDT UEFI BGRT
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP8(S4) XHCI(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2394.42 MHz, 06-4e-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2394.43 MHz, 06-4e-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2394.42 MHz, 06-4e-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2394.42 MHz, 06-4e-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 2 (EXP1)
acpiprt5 at acpi0: bus 4 (EXP3)
acpiprt6 at acpi0: bus -1 (EXP4)
acpiprt7 at acpi0: bus -1 (EXP5)
acpiprt8 at acpi0: bus -1 (EXP8)
acpiprt9 at acpi0: bus -1 (RP09)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 model "45N1738" serial 17 type LION oem "LGC"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
tpm0 at acpi0 TPM_: unsupported TPM2 start method
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1)
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1)
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1)
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1)
acpipwrres0 at acpi0: PUBS, resource for XHCI
acpipwrres1 at acpi0: PG00, resource for PEG0
acpipwrres2 at acpi0: PG01, resource for PEG1
acpipwrres3 at acpi0: PG02, resource for PEG2
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI
1.3.1
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG MZ7LF192, FXT0> naa.5002538700000000
sd0: 183151MB, 512 bytes/sector, 375093936 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel AC 8260" rev 0x3a, msi
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek ALC293, Intel/0x2809, using Realtek ALC293
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int
16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address
c8:5b:76:06:5c:2d
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.2, 0x1e2b1 0x943300 0x2fed40 0xf006a3
0x12e800
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
dt: 445 probes
uvideo0 at uhub0 port 10 configuration 1 interface 0 "SunplusIT Inc Integrated
Camera" rev 2.00/0.12 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 183150MB, 512 bytes/sector, 375092321 sectors
root on sd1a (3cb091d2982831dc.a) swap on sd1b dump on sd1b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x200, fw ver 36.ca7b901d.0, address 44:85:00:f1:21:a1
usbdevs:
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
addr 02: 5986:0706 SunplusIT Inc, Integrated Camera
high speed, power 500 mA, config 1, rev 0.12
driver: uvideo0
addr 03: 1bcf:0005 Sunplus, USB Optical Mouse
low speed, power 98 mA, config 1, rev 0.14
driver: uhidev0
