running console on ttyS1 should only cause confusion but should not affect getty.
what version of busybox you are using ? what options for getty ? re, wh [EMAIL PROTECTED] schrieb: > > hi all, > when logging on via the serial port (ttyS1) i get prompted for the username > when > i enter it and hit return it gets echoed back to me on the line below, and > then > when i enter the password nothing happens and it eventually times out. > on entering the username/password a second time all is well. > > essentially the same problem described in message... > > http://www.busybox.net/lists/busybox/2004-August/012267.html > > so i tried turning off syslogd but this wasnt sufficient, i also > had to remove "console=ttyS1, 9600" from the kernel command line, which > seems to me to fit in with the advice given in the above message and does > remove > the problem of the first login always failing. however it means i dont > see the kernel boot messages. > > is there a better solution? and if not could someone give me an idea > of how big a job this is to fix and where i should start? > thanks, > fleg > > _______________________________________________ busybox mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/busybox
