hi walter, On Wed Nov 5 17:06 , walter harms sent: > >running console on ttyS1 should only cause confusion >but should not affect getty.
i agree :) > >what version of busybox you are using ? >what options for getty ? d'oh! of course... busybox-1.12.1 and the getty... ttyS1::respawn:/sbin/getty -L ttyS1 9600 vt100 thanks, fleg > >re, > wh > > > >[EMAIL PROTECTED] schrieb: >> >> hi all, >> when logging on via the serial port (ttyS1) i get prompted for the username >> when >> i enter it and hit return it gets echoed back to me on the line below, and >> then >> when i enter the password nothing happens and it eventually times out. >> on entering the username/password a second time all is well. >> >> essentially the same problem described in message... >> >> http://www.busybox.net/lists/busybox/2004-August/012267.html >> >> so i tried turning off syslogd but this wasnt sufficient, i also >> had to remove "console=ttyS1, 9600" from the kernel command line, which >> seems to me to fit in with the advice given in the above message and does >> remove >> the problem of the first login always failing. however it means i dont >> see the kernel boot messages. >> >> is there a better solution? and if not could someone give me an idea >> of how big a job this is to fix and where i should start? >> thanks, >> fleg >> >> _______________________________________________ busybox mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/busybox
