Ian Harrold wrote:
I am trying to get PPPD working on an ARM based processor (actually a
Marvell PXA310 XScale). I am running BusyBox v1.01 and Linux Kernel v
2.6.21
have compiled kernel with the following flags set:
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLAGE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_SLIP=y
And indeed as the kernel loads I see the following:
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression moduel registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256)
I have downloaded the PPP Daemon (pppd) v 2.4.4 source code from the
samba website:
ftp://ftp.samba.org/pub/ppp/
ppp package cross compiles fine and is added into to the filesystem
image as it is compiled. When I run "pppd", the console terminal will
hang outputting nothing. I expect to see something similar to this
however:
~�}#�!}!}!} }4}"}&} } } } }%}&�.�O}'}"}(}"F�~
which would be authentication/handshaking attempts with a modem. If I
tell pppd to use Serial Port 2 "ttyS1" or any other serial port than
the currently connected consonole's port, the daemon immediatly unloads.
Anyone have experience/insight into what could be going wrong?
------------------------------------------------------------------------
_______________________________________________
busybox mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/busybox
Do you have udev running?
_______________________________________________
busybox mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/busybox
