On Saturday 24 July 2010 17:23:18 Denys Vlasenko wrote: > On Tuesday 13 April 2010 20:09, Rob Landley wrote: > > I can confirm this on my armv4tl system image: > > > > wget > > http://impactlinux.com/fwl/downloads/binaries/system-image-armv4tl.tar.bz > >2 tar xvjf system-image-armv4tl.tar.bz2 > > cd system-image-armv4tl > > ./run-emulator.sh > > > > wait through the boot messages... > > > > (armv4tl) /home # time hwclock -w > > real 0m 24.98s > > user 0m 0.01s > > sys 0m 0.01s > > > > This assumes you have qemu 0.12.x installed. > > Wanted to run system-image-i686 today. It did not work. > Thus I went back to this old email and system-image-armv4tl indeed works, > but system-image-i686 from the same location > (http://impactlinux.com/fwl/downloads/binaries/) does not. Boot ends with:
wget http://impactlinux.com/aboriginal/downloads/binaries/system-image- i686.tar.bz2 cd system-image-i686 ./run-emulator.sh ... VFS: Mounted root (squashfs filesystem) readonly on device 3:0. Freeing unused kernel memory: 216k freed e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Not using distcc. Type exit when done. (i686) /home # It worked for me? What qemu version are you using? > input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input0 List of all partitions: > 0300 27500 hda driver: ide-gd > No filesystem could mount root, tried: ext3 ext2 squashfs vfat It tried the squashfs driver right there. > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(3,0) Pid: 1, comm: swapper Not tainted 2.6.33 #1 > Call Trace: > [<c101aec7>] ? panic+0x47/0x100 > [<c122bb10>] ? mount_block_root+0x190/0x280 > [<c1002930>] ? sysenter_exit+0xc/0x14 > [<c122bc47>] ? mount_root+0x47/0x60 > [<c122b4e0>] ? kernel_init+0x0/0x110 > [<c122bdc5>] ? prepare_namespace+0x165/0x1a0 > [<c106882f>] ? sys_access+0x1f/0x30 > [<c122b5de>] ? kernel_init+0xfe/0x110 > [<c1002e36>] ? kernel_thread_helper+0x6/0x10 > Rebooting in 1 seconds.. > > Apparently it doesn't recognize squashfs image... Weird. Run "file" on that squashfs image? (Did you get a corrupted download? Full disk? Short write? The tarball extract should complain if so...) > P.S. I confirmed under qemu that vi now detects screen size (though sh > doesn't, because sh uses answerback ESC sequence for other purposes, not > for width check (the fact I completely forgot)). I just released 1.17.1. > Let me know what broke. Yay! I'll give it a try. Thanks. Rob -- GPLv3: as worthy a successor as The Phantom Menace, as timely as Duke Nukem Forever, and as welcome as New Coke. _______________________________________________ busybox mailing list [email protected] http://lists.busybox.net/mailman/listinfo/busybox
