Set the baud rate for 9600 on the 718
73, Ron, K5HM <mailto:[email protected]> [email protected] <http://www.qrz.com/db/k5hm> www.qrz.com/db/k5hm Excelsior! From: BVARC [mailto:[email protected]] On Behalf Of GMuller885--- via BVARC Sent: Friday, August 7, 2015 10:31 PM To: [email protected] Cc: [email protected] Subject: Re: [BVARC] N3FJP software bob: on rig interface setting select Icom. thenselect a com port not in use. I choose 5 or 8. Set the baud rate as per you Radio specs. mine works at 38.4. parity select none. Data bits 8. Stop bit 2. Connection power RTS. polling 2 sec. If this does not work then go to the following link http://www.n3fjp.com is were I got my information. Gerald Muller K9GEM [email protected] <mailto:[email protected]> In a message dated 8/7/2015 5:54:26 P.M. Central Daylight Time, [email protected] <mailto:[email protected]> writes: Anybody have an N3FJP config file for an Icom radio? It appears to not be model specific, but I have a 718. Thanks, Bob Sent from my iPad _______________________________________________ BVARC mailing list [email protected] <mailto:[email protected]> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
