I use a very cheap substitute in the form of a clear piece like a small 3M hook that had adhesive back for my HM-98 mic. The adhesive did not work so I used a small dab of automotive trim adhesive and pressed in place where I wanted it. I then let it cure over night. Silicone seal will work just as well. It has been there now for over five years and the hooks came in a package of about 12 which made the overall cost of about 30 cents. NO HOLES.
You might want to try this. 73 .... Scott KD5FBA Scott Medbury 16802 Aprilmont Drive Sugar Land, TX 77498-1941 [email protected] From: BVARC [mailto:[email protected]] On Behalf Of K5HM via BVARC Sent: Wednesday, October 28, 2015 3:24 PM To: 'BRAZOS VALLEY AMATEUR RADIO CLUB' Cc: K5HM Subject: [BVARC] Dashboard Microphone Clip I need a Dashboard Microphone clip for an Icom HM-151 mic. I just need the clip. It's a little rectangular piece of metal with two holes in it for maounting and a hook on the end. If anyone has a spare they don't need. I will take it off their hands. 73, Ron, K5HM <mailto:[email protected]> [email protected] <http://www.qrz.com/db/k5hm> www.qrz.com/db/k5hm ARRL Logologo (2)smaller Prize Excelsior!
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
