FYI, those same hooks that Scott mentioned will fit perfectly into the
standard mic holders. When I say standard, I mean the old style mic holder
for the mic with the round post on the back.

We had a mic change in my wife's truck from the old style mic to a mic with
a loop at the top. The little 3m hook slid right into the old holder.
Voila. Easy fix.

Seven Three,

Michael - K5WRN
http://www.qrz.com/db/K5WRN

On Wed, Oct 28, 2015 at 7:45 PM, Scott Medbury via BVARC <[email protected]>
wrote:

> I use a very cheap substitute in the form of a clear piece like a small 3M
> hook that had adhesive back for my HM-98 mic. The adhesive did not work so
> I used a small dab of automotive trim adhesive and pressed in place where I
> wanted it. I then let it cure over night. Silicone seal will work just as
> well. It has been there now for over five years and the hooks came in a
> package of about 12 which made the overall cost of about 30 cents. NO HOLES.
>
>
>
> You might want to try this.
>
>
>
> 73 .... Scott KD5FBA
>
>
>
>
>
> Scott Medbury
>
> 16802 Aprilmont Drive
>
> Sugar Land, TX 77498-1941
>
> [email protected]
>
>
>
> *From:* BVARC [mailto:[email protected]] *On Behalf Of *K5HM via
> BVARC
> *Sent:* Wednesday, October 28, 2015 3:24 PM
> *To:* 'BRAZOS VALLEY AMATEUR RADIO CLUB'
> *Cc:* K5HM
> *Subject:* [BVARC] Dashboard Microphone Clip
>
>
>
> I need a Dashboard Microphone clip for an Icom HM-151 mic.
>
>
>
> I just need the clip.  It’s a little rectangular piece of metal with two
> holes in it for maounting and a hook on the end. If anyone has a spare they
> don’t need.  I will take it off their hands.
>
>
>
> 73,
>
> Ron, K5HM
>
> [email protected]
>
> www.qrz.com/db/k5hm
>
> [image: ARRL Logo][image: logo (2)][image: smaller Prize]
>
> *        Excelsior!*
>
>
>
> _______________________________________________
> BVARC mailing list
> [email protected]
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>
>
_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org

Reply via email to