I had acquired this 10/15/20 beam some years ago, in anticipation of erecting
it on a future tower. I got it on the cheap, as it does require some rehab.
It's in fair to good shape. I'd say 95% of the parts are there. It's been
stored out of the weather. There is one small bend on one of the small
elements. The manual is available on the Hy-Gain site.This particular beam is
some 75 lbs. with a rather large wind profile.
I'm better served with something much lighter - a hex beam - which is much
smaller and less cumbersome. Though I know the performance and power rating is
lower as a result, overall it'll suit my operating intent.
I've pulled the entire assemblage of parts out of storage this past weekend and
it's easy to pass on to whoever is interested in this project antenna.
Contact me off the list. If you know someone else might be interested (say on
another list) please pass along. Otherwise, it'll show up at the hamfest.
Thanks!Mark JanzerK5MGJ
_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Message delivered to [email protected]
