Jerry, Refresh my memory. Rotor type? Beam type? Hazer? Maybe you upgraded, not sure. Been awhile. At what height is the antenna? Tnx. Rick
Sent from my i-Thingamajig > On Aug 6, 2020, at 2:30 PM, gmuller885--- via BVARC <[email protected]> wrote: > > Help.: > During the Hurricane that was supposed to hit Houston with 60 to 80 MPH > winds I decided to lower my Beam, which I did. Unfortunately I forgot that I > had done so when I got up around midnight and was getting ready to work some > FT8. I spotted a station I needed and swung the beam. The beam locked up and > I can not get it away from the locked bearing although it is still at the > same position. I because of that I was able to raise the Beam to the top of > the tower. I was able to move the beam to 325 deg. It locked up there again. > I have reset the defaults which changed the bearing to 297 deg but does not > move the beam. The beam still will not move. Believe the brake is locked. I > can not lower it it as it needs a bearing of 151 deg to clear the tower. Any > and all help would be greatly appreciated. Any suggestions on what is broke > would help. The DCU 3 tries to move the beam but nothing happens. Any and all > help is appreciated. By the way I am recuperating from a broken toe so can > not be of much physical help. > > Gerald Muller K9GEM > USN DSC (SW) Retired > [email protected] > ________________________________________________ > Brazos Valley Amateur Radio Club > > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
________________________________________________ Brazos Valley Amateur Radio Club BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
