You must be intimate with your radio and its manual. After you read it,
read it again.
I suggest you buy a good programming cable and use Chirp to program your
radio. Once you use it you will see why. youtube has videos if you need
some help with it.
If you use Chirp and it works for you, make a donation. They work hard
to keep it up to date with a lot of different radios.
https://chirp.danplanet.com/projects/chirp/wiki/Home
It all gets easier the more time you spend with this stuff.
Mike
Ki5MIK
On 6/16/2021 9:23 AM, Timothy Herrin via BVARC wrote:
To all,
I just got my technician license and have been playing around with my
simple Baofeng radio. I set the frequencies, but the difference
between my upper and lower frequencies change after inputing the tone.
I'm unable to hear anything and I'm just trying to figure out if I've
set it up wrong or my antenna isn't strong enough to reach a repeater.
Looking for an ELMER.
-KI5LYP
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/[email protected]/
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/[email protected]/
