Teflon tape. ( water / gas tape ) On Wed, Jun 1, 2022 at 10:32 AM Gus Bernard via BVARC <[email protected]> wrote:
> Mark, for such a small screw, I'd try the blue LokTite (or equivalent) > and, if it doesn't work, drill and tap for a larger screw. > > Don't know what it looks like under the lid, but another alternative might > be to hold it closed from the inside with Velcro or VHB tape. > > Gus K5GMB > > On Tue, May 31, 2022 at 11:28 PM Mark Brantana via BVARC <[email protected]> > wrote: > >> Here's a question everyone is likely to encounter at some time, and I am >> hoping someone has an answer. There are tiny screws holding the back of my >> macbook air. The pentalobe size is 1.2, and the screw shaft size appears to >> be around 0.75 mm. The screw appears to be stainless steel, and the case >> appears to be aluminum. The screw appears to be fine, but the hole is >> stripped. Does anyone have a solution for properly and permanently fixing >> the hole? >> Mark >> N5PRD >> >> ________________________________________________ >> Brazos Valley Amateur Radio Club >> >> BVARC mailing list >> [email protected] >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Publicly available archives are available here: >> https://www.mail-archive.com/[email protected]/ >> > ________________________________________________ > Brazos Valley Amateur Radio Club > > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/[email protected]/ > -- David Hold [email protected]
________________________________________________ Brazos Valley Amateur Radio Club BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/[email protected]/
