From what I'm reading you really don't need the Signalink. The IC-9100
has a USB port that handles audio and rig control so it basically has a
Signalink built in. There are a few settings on the radio to make the
port active. This might be a good place to start
https://wb4son.com/wpblog/?p=2390 While this article talks about WSJT,
the same instructions pretty much apply to any of the computer
controlled digital modes
--jv
On 8/6/2022 2:30 PM, Bruce via BVARC wrote:
I am changing from my old Kantronics KAM Plus to a SignaLink USB (at
least trying to). I bought the ICOM plug and play jumper. Have it
hooked up to my computer. Have the SignaLink cable to the IC-9100 accy
port. Nothing happens on the radio when I try to transmit or receive.
What am I missing? I tried to use a SignaLink modem about 3-4 years
ago and never got it to work. Gave it to another ham to have the
headache. Now, giving it a try again before giving this one away as well.
73...bruce
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: https://www.mail-archive.com/[email protected]/
