Dan, 
We can discuss at Brews with BVARC tonight.  It’ll be at 18:30 at No Label 
brewery in Katy.  It’s over by the silos.

73,
Stephen (W2WF)


> On Jan 6, 2026, at 10:26, Daniel Poirot via BVARC <[email protected]> wrote:
> 
> 
> TL;DR 
> I am reaching out to anyone interested in SDR, EFHWs, battery operation, and 
> maybe even PoTA.
> 
> 
> Howdy all,
> 
> First, many thanks to the member who corrected my on-air etiquette regarding 
> how I was breaking into a QSO to comment. I will do better! ;-)
> 
> Happy New Year to all. Did anyone get a shiny, new SDR rig for the new year? 
> I have an 8-band, uSDX+. It's yet another clone of the (tr)uSDX. I have found 
> about 11 or 12 clones of this design - white buttons, black buttons, orange 
> and blue buttons, grey buttons, HT, red corners, and orange top - lots of 
> them. 
> 
> The ones I have found use the uSDXOpen code, hosted on GitHub. With the 
> Arduino IDE, a very low-cost Arduino UNO, and a few jumper wires, I have 
> upgraded my firmware from 1.02 to 4.00d. Easy to do and a big improvement. 
> 
> I have this paired with a small LiFePO4 battery and a QRPGuys 'No Tune' 
> end-fed half-wave. Using a linked stretch of electric fence wire (thanks, Big 
> John), I have made contacts on 20 meters and 40 meters. Crazy, but fun!
> 
> I am reaching out to anyone interested in SDR, EFHWs, battery operation, and 
> maybe even PoTA. I am happy to advise on any of these topics to the best of 
> my ability. 
> 
> 73's to all
> Dan KJ5IZK
> <586501813_1173393241558933_3326928977878799888_n.jpg>
> ________________________________________________
> Brazos Valley Amateur Radio Club
> 
> BVARC mailing list
> [email protected]
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/[email protected]/


________________________________________________
Brazos Valley Amateur Radio Club

BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/[email protected]/ 

Reply via email to