Evan Layton wrote: >> >> >> Here is the test journal: >> Lenovo >> t61:http://greatwall.prc/~xz201216/snap/results/1015/zone/t61/summary.html >> >> raindoctor(Dell >> 270):http://greatwall.prc/~xz201216/snap/results/1015/zone/raindoctor/summary.html >> >> >> xVM:http://greatwall.prc/~xz201216/snap/results/1015/zone/xvm/summary.html >> >> Virtual >> Box:http://greatwall.prc/~xz201216/snap/results/1015/zone/vb/summary.html >> >> >> <note: only regression test run for virtual box because I could not >> find a way to make the virtual machine >> ping external network. Right now, I configure the network card of the >> virtual machine as NAT mode, but >> it only ping the host machine, could not reach IPS server. Which made >> is impossible to set up ipkg zones.> Thanks for Glenn? help, I could finally test the zone test cases on virtual box.
I finished the tests on virtual box for zone support, here is the journal link. http://greatwall.prc/~xz201216/snap/results/1015/zone/vb2/summary.html From the results above, the results is same as the other test journal, only 3901 and 3926 are found. But there is an issue here, at first, I set the virtual machine box with 260M RAM, it could not run it fully through the test cases, after repeating create zones and run beadm create several times, the machine will be so slow that it is hanging, there is no way to reboot or dump at all. I have to directly poweroff, so could not save any dump. But if I give it with RAM > 1G, the whole test cases could be run very smoothly and the results are same as the one in real machine. Thanks Jason
