Hello,
This webrev is my proposed fix to the following installadm bugs:
7481 Remove use of site-specific option, GrubMenu, from AI setup
15531 installadm build_136 creates bad macro for X86 service
15593 create-client: needs to quote dhtadm macro strings again
In testing, I found the following and propose to fix it too, supplying
doctests to document and test the run_cmd() API:
15588 installadm_common: run_cmd() should raise OSError if non-existent
command is attempted
Webrev:
http://cr.opensolaris.org/~clayb/15531/
I have manually run the following tests to verify functionality. My
baseline machine was running build 132 and my fix, test machine was
running build 135 with the fixes applied.
Thank you,
Clay
SPARC Create Service (fixed):
-----------------------------
r...@jumprope:~# installadm create-service -n install_test_ai_sparc1 -s
/tmp/clay_sparc_test_20100326-1512.iso /var/install_test_ai_sparc1
Warning: NWAM is enabled. Please be sure that the IP address for jumprope
is static.
Setting up the target image at /var/install_test_ai_sparc1 ...
Registering the service install_test_ai_sparc1._OSInstall._tcp.local
Detected that DHCP is not set up on this server.
If not already configured, please create a DHCP macro
named dhcp_macro_install_test_ai_sparc1 with:
Boot server IP (BootSrvA) : 172.20.24.78
Boot file (BootFile) :
http://172.20.24.78:5555/cgi-bin/wanboot-cgi
If you are running the Solaris DHCP Server, use the following
command to add the DHCP macro, dhcp_macro_install_test_ai_sparc1:
/usr/sbin/dhtadm -g -A -m dhcp_macro_install_test_ai_sparc1 -d
:BootSrvA=172.20.24.78:BootFile=\"http://172.20.24.78:5555/cgi-bin/wanboot-cgi\":
Note: Be sure to assign client IP address(es) if needed
(e.g., if running the Solaris DHCP Server, run pntadm(1M)).
Service discovery fallback mechanism set up
Creating SPARC configuration file
Service install_test_ai_sparc is currently being used by SPARC clients
which have not explicitly been associated with another service via the
'create-client' subcommand.
To select service install_test_ai_sparc1 for those SPARC clients, use the
following commands:
/usr/bin/rm -f /etc/netboot/wanboot.conf
/usr/bin/ln -s install_test_ai_sparc1/wanboot.conf /etc/netboot
SPARC Create Service (baseline):
--------------------------------
Setting up the target image at /var/install_test_ai_sparc1 ...
Registering the service install_test_ai_sparc1._OSInstall._tcp.local
Detected that DHCP is not set up on this server.
If not already configured, please create a DHCP macro
named dhcp_macro_install_test_ai_sparc1 with:
Boot server IP (BootSrvA) : 10.6.68.21
Boot file (BootFile) : http://10.6.68.21:5555/cgi-bin/wanboot-cgi
If you are running the Solaris DHCP Server, use the following
command to add the DHCP macro, dhcp_macro_install_test_ai_sparc1:
/usr/sbin/dhtadm -g -A -m dhcp_macro_install_test_ai_sparc1 -d
:BootSrvA=10.6.68.21:BootFile=\"http://10.6.68.21:5555/cgi-bin/wanboot-cgi\":
Note: Be sure to assign client IP address(es) if needed
(e.g., if running the Solaris DHCP Server, run pntadm(1M)).
Service discovery fallback mechanism set up
Creating SPARC configuration file
Service osol-dev-128a-ai-sparc is currently being used by SPARC clients
which have not explicitly been associated with another service via the
'create-client' subcommand.
To select service install_test_ai_sparc1 for those SPARC clients, use the
following commands:
/usr/bin/rm -f /etc/netboot/wanboot.conf
/usr/bin/ln -s install_test_ai_sparc1/wanboot.conf /etc/netboot
SPARC Create Service Diffs (Normalized IP addresses):
-----------------------------------------------------
1d0
< Warning: NWAM is enabled. Please be sure that the IP address for
jumprope is static.
18c17
< Service install_test_ai_sparc is currently being used by SPARC clients
which have not explicitly been associated with another service via the
'create-client' subcommand.
---
Service osol-dev-128a-ai-sparc is currently being used by SPARC clients
which have not explicitly been associated with another service via the
'create-client' subcommand.
SPARC Create Client (fixed):
----------------------------
r...@jumprope:~# pfexec installadm create-client -e c0ffeec0ffee -n
install_test_ai_sparc1
Creating SPARC configuration file
Detected that DHCP is not set up on this server.
If not already configured, please create a DHCP macro
named 01C0FFEEC0FFEE with:
Boot server IP (BootSrvA) : 172.20.24.78
Boot file (BootFile) :
http://172.20.24.78:5555/cgi-bin/wanboot-cgi
If you are running the Solaris DHCP Server, use the following
command to add the DHCP macro, 01C0FFEEC0FFEE:
/usr/sbin/dhtadm -g -A -m 01C0FFEEC0FFEE -d
:BootSrvA=172.20.24.78:BootFile=\"http://172.20.24.78:5555/cgi-bin/wanb
oot-cgi\":
Note: Be sure to assign client IP address(es) if needed
(e.g., if running the Solaris DHCP Server, run pntadm(1M)).
SPARC Create Client (baseline):
-------------------------------
Setting up SPARC client...
Creating SPARC configuration file
Detected that DHCP is not set up on this server.
If not already configured, please create a DHCP macro
named 01C0FFEEC0FFEE with:
Boot server IP (BootSrvA) : 10.6.68.21
Boot file (BootFile) : http://10.6.68.21:5555/cgi-bin/wanboot-cgi
If you are running the Solaris DHCP Server, use the following
command to add the DHCP macro, 01C0FFEEC0FFEE:
/usr/sbin/dhtadm -g -A -m 01C0FFEEC0FFEE -d
:BootSrvA=10.6.68.21:BootFile=\"http://10.6.68.21:5555/cgi-bin/wanboot-cgi\":
Note: Be sure to assign client IP address(es) if needed
(e.g., if running the Solaris DHCP Server, run pntadm(1M)).
SPARC Create Client Diffs (Normalized IP addresses):
----------------------------------------------------
0a1
Setting up SPARC client...
3d3
<
7c7
< Boot server IP (BootSrvA) : X.X.X.X
---
Boot server IP (BootSrvA) : X.X.X.X
X86 Create Service (fixed):
---------------------------
Warning: NWAM is enabled. Please be sure that the IP address for jumprope
is static.
Setting up the target image at /var/ai/install_test_ai_x86 ...
Registering the service install_test_ai_x86._OSInstall._tcp.local
Detected that DHCP is not set up on this server.
If not already configured, please create a DHCP macro
named dhcp_macro_install_test_ai_x86 with:
Boot server IP (BootSrvA) : 172.20.24.78
Boot file (BootFile) : install_test_ai_x86
If you are running the Solaris DHCP Server, use the following
command to add the DHCP macro, dhcp_macro_install_test_ai_x86:
/usr/sbin/dhtadm -g -A -m dhcp_macro_install_test_ai_x86 -d
:BootSrvA=172.20.24.78:BootFile=install_test_ai_x86:
Note: Be sure to assign client IP address(es) if needed
(e.g., if running the Solaris DHCP Server, run pntadm(1M)).
Service discovery fallback mechanism set up
Service discovery fallback mechanism set up
X86 Create Service (baseline):
------------------------------
Setting up the target image at /var/ai/install_test_ai_x86 ...
Registering the service install_test_ai_x86._OSInstall._tcp.local
Detected that DHCP is not set up on this server.
If not already configured, please create a DHCP macro
named dhcp_macro_install_test_ai_x86 with:
Boot server IP (BootSrvA) : 10.6.68.21
Boot file (BootFile) : install_test_ai_x86
GRUB Menu (GrubMenu) : menu.lst.install_test_ai_x86
If you are running the Solaris DHCP Server, use the following
command to add the DHCP macro, dhcp_macro_install_test_ai_x86:
/usr/sbin/dhtadm -g -A -m dhcp_macro_install_test_ai_x86 -d
:BootSrvA=10.6.68.21:BootFile=install_test_ai_x86:GrubMenu=menu.lst.install_test_ai_x86:
Additionally, if the site specific symbol GrubMenu
is not present, please add it as follows:
/usr/sbin/dhtadm -g -A -s GrubMenu -d Site,150,ASCII,1,0
Note: Be sure to assign client IP address(es) if needed
(e.g., if running the Solaris DHCP Server, run pntadm(1M)).
Service discovery fallback mechanism set up
Service discovery fallback mechanism set up
X86 Create Service Diffs (Normalized IP addresses):
---------------------------------------------------
1,2d0
< Warning: NWAM is enabled. Please be sure that the IP address for
jumprope
< is static.
10a9
GRUB Menu (GrubMenu) : menu.lst.install_test_ai_x86
13,14c12,17
< /usr/sbin/dhtadm -g -A -m dhcp_macro_install_test_ai_x86 -d
< :BootSrvA=X.X.X.X:BootFile=install_test_ai_x86:
---
/usr/sbin/dhtadm -g -A -m dhcp_macro_install_test_ai_x86 -d
:BootSrvA=X.X.X.X:BootFile=install_test_ai_x86:GrubMenu=menu.lst.install_test_ai_x86:
Additionally, if the site specific symbol GrubMenu
is not present, please add it as follows:
/usr/sbin/dhtadm -g -A -s GrubMenu -d Site,150,ASCII,1,0
_______________________________________________
caiman-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
