Hi Kristina,
thank you very much for addressing that so quickly.
The changeslook good to me modulo naming services nits
mentioned below.
I have picked up modified files and let js2ai generate profile
from sysidcfg file below (*).
Then I used generated SC profile to configure freshly installed
non-global zone with exclusive IP stack equipped with one 'anet'
resource (with link name 'net0').
I verified that after sysconfig finished, configuration was as
expected (**). In output below, some of information is masked
(name server addresses, DNS domains).
The only nit I see is with DNS, js2ai still requires
domain_name. According to William, domain name should not be
mandatory:
"For DNS, "domain_name" should not be required. "search", which
specifies the DNS
search list, should be supported. "domain_name" and "search" (the latter
allowing multiple values)
should be mutually exclusive."
That said, if fixing that would delay push,
I think it would be acceptable limitation at
this point.
Also, I haven't tested neither NIS nor LDAP. William
is more familiar with that area, so I will let him
verify that generated profiles are correct.
Jan
(*)
system_locale=C
terminal=vt100
network_interface=net0 {
hostname=sc-zone
ip_address=192.168.100.57
netmask=255.255.255.0
default_route=192.168.100.1
protocol_ipv6=yes
}
name_service=DNS {
domain_name=A.B.C
search=A.B.C,B.C
name_server=X.X.X.X,Y.Y.Y.Y
}
timezone=Europe/Prague
root_password=$5$dnRfcZse$Hx4aBQ161Uvn9ZxJFKMdRiy8tCf4gMT2s2rtkFba2y4
(**)
[1] locale (LANG smf property set to 'C')
# svcprop -p environment init
environment/LC_ALL astring ""
environment/LC_COLLATE astring ""
environment/LC_CTYPE astring ""
environment/LC_MESSAGES astring ""
environment/LC_MONETARY astring ""
environment/LC_NUMERIC astring ""
environment/LC_TIME astring ""
environment/TZ astring localtime
environment/value_authorization astring solaris.smf.value.environment
environment/LANG astring C
#
[2] timezone
# date
Wed Sep 21 10:04:40 CEST 2011
#
[3] terminal type
# svcprop -p ttymon/terminal_type console-login:default
vt100
# echo $TERM
vt100
#
[4a] net0 network interface configured with supplied static IPv4
[4b] IPv6 autoconfiguration enabled on net0
# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
net0/v4 static ok 192.168.100.57/24
lo0/v6 static ok ::1/128
net0/v6 addrconf ok fe80::8:20ff:feb0:2a76/10
#
[5] IPv4 default route set correctly
# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ---------- ---------
default 192.168.100.1 UG 2 135 net0
127.0.0.1 127.0.0.1 UH 2 1302 lo0
192.168.100.0 192.168.100.57 U 3 0 net0
Routing Table: IPv6
Destination/Mask Gateway Flags Ref
Use If
--------------------------- --------------------------- ----- ---
------- -----
::1 ::1 UH 2
42 lo0
fe80::/10 fe80::8:20ff:feb0:2a76 U 2
0 net0
#
[6] DNS configured and working
# cat /etc/resolv.conf
...
domain A.B.C
search A.B.C,B.C
nameserver X.X.X.X
nameserver Y.Y.Y.Y
# ping -a tio
tio (Z.Z.Z.Z) is alive
#
[7] root password (was able to log in as root)
# grep root /etc/shadow
root:$5$dnRfcZse$Hx4aBQ161Uvn9ZxJFKMdRiy8tCf4gMT2s2rtkFba2y4:6445::::::
#
On 09/21/11 04:36, Kristina Tripp wrote:
> Good Evening. Please find an initial review the following changes
> that I've been given tentative approval for. I'm sending this out now
> despite testing being incomplete since I've been asked to have this
> completed by COB tomorrow and the primary reviewers are in Prague.
>
> https://cr.opensolaris.org/action/browse/caiman/enpointe/CR7092529/webrev/
>
> 7091163 <http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=7091163>
> js2ai should set name of<ai_instance name=""> to profile name instead of
> default
> 7091196 <http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=7091196>
> js2ai not processing filesys swap entry correct - vdev entry omitted
> 7092486 <http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=7092486>
> install/js2ai has incorrect license
> 7092529 <http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=7092529>
> js2ai - DNS conversion in sysidcfg is incorrect
> 7091377 <http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=7091377>
> SC profile generated by js2ai(1m) tool does not configure some parameters
> correctly
>
> Profile changes in conv.c were tested via Harold during some testing
> earlier in the week
> Testing of the changes in conv_sysidcfg.c is incomplete at this point
> in time as I'm hoping William and/or Jan can test these changes for me
> Testing a package install to ensure license info is installed properly
> is still outstanding
> Unit test all pass
>
>
>
> _______________________________________________
> caiman-discuss mailing list
> [email protected]
> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
_______________________________________________
caiman-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
