On Wed, Aug 1, 2018 at 5:49 AM [email protected] <[email protected]> wrote: > > Yeah. Small FF 2 port Celeron board is what I use. And I have a 4 port Atom > that runs like a bat out of hell. > > Currenty fiddling with Xilinx Dev boards, just put packet processing in FPGA > for Cake, and no problem with 2.5 - 10 Gb/sec. Just need a free piece of low > level SFP+ interfacing logic.
cool. which? ultrascale? I was looking over http://cseweb.ucsd.edu/~ssradhak/Papers/senic-nsdi14.pdf again > My use case is using the open ChipLink/TileLink bus from RISCV rather than > PCIe, making something that might be an open source ASIC design. How fast can that cpu context switch? > > > -----Original Message----- > From: "Toke Høiland-Jørgensen" <[email protected]> > Sent: Wed, Aug 1, 2018 at 5:23 am > To: "Dave Taht" <[email protected]>, "Daniel Ezell" <[email protected]> > Cc: "Dave Taht" <[email protected]>, "Daniel Ezell" <[email protected]>, > "Cake List" <[email protected]>, [email protected] > Subject: Re: [Cerowrt-devel] expressobin > > Dave Taht writes: > > > It turns out it's just two ethernets with one, connected to a 2 port > > switch. Not what I wanted. I'd wanted something different from the > > apu2 or edgerouter X to play with, and I know the mvneta driver was > > bql'd. > > I bought one of these to play with: > https://teklager.se/en/products/routers/tlsense-i3-4lan > > x86 (i3 processor), four real ethernet ports, and passively cooled. A > bit pricy, though; more than $400... But doubles well as a combined > switch and media player :) > > -Toke > _______________________________________________ > Cerowrt-devel mailing list > [email protected] > https://lists.bufferbloat.net/listinfo/cerowrt-devel > > -- Dave Täht CEO, TekLibre, LLC http://www.teklibre.com Tel: 1-669-226-2619 _______________________________________________ Cake mailing list [email protected] https://lists.bufferbloat.net/listinfo/cake
