On Mon, 21 May 2007, Mike Jagdis wrote:
> Use the latest callweaver SVN and simply put "polarityevents=no" in
> zapata.conf for the relevant channel. See the latest zapata.conf.sample
> for details.
Does that do the same job as "cidstart=usehist"? The usehist patch for
Asterisk 1.2 seemed to apply cleanly once I'd renamed various variables in
it (and it works)
> Mind you, non-detection of caller ID shouldn't leave garbage in the
> vars. I'll have a look...
It looks like it is tied to unknown callerIDs - when the "ogi_"
environment variables list the caller as "unknown" I get garbage from the
CALLERID() variables. (So I've now changed to using the "ogi_" variables,
which has the side effect of making things slightly quicker too :)
> N.B. X100Ps don't support the complex impedance used for UK lines
> (HW limitation) so balancing RX gain, TX gain and echo can be "interesting".
> TDM400s and clones work fine - and have polarity detection (which needs
> a zaptel driver patch to stop it screwing up)
Yes, I discovered this after buying the X100P a few years ago - I have to
run it with agressive echo suppression, which isn't ideal. I was hoping
that we'd get naked DSL showing up in the UK so I could ditch the POTS
connection altogether anyway (no such luck so far). :-/
--
- Steve
xmpp:[EMAIL PROTECTED] sip:[EMAIL PROTECTED] http://www.nexusuk.org/
Servatis a periculum, servatis a maleficum - Whisper, Evanescence
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users
