Hi Vivek, On Sun, 2007-09-23 at 19:41 -0700, Vivek Shrivastava wrote: > Hey Nasir, > > Have you tried disabling the ECM? You might need to request gafachi
I have tried with both with ECM and without ECM. but same problem. > for disabling the ECM from there side too. > > Thanks, > > Vivek > > > On 9/23/07, Nasir Iqbal <[EMAIL PROTECTED]> wrote: > Hi, > > I upgraded my callweaver with lestest spandsp-0.0.4pre9.tgz > and > callweaver-RC-1.1.99.20070923 but same error. > > I have captured tcp traffic for gafachi, Please find logs from > following links > > http://www.taibapress.com/call/dump/callweaver_cli.txt > > http://www.taibapress.com/call/dump/tcpdump.txt > > > Thanks > Nasir Iqbal > http://www.ictinnovations.com > > On Sat, 2007-09-22 at 10:41 +0200, CtRiX wrote: > > Nasir Iqbal wrote: > > > by seeing sip messages I found the following three type of > errors. > > > > > > 1. gafachi send T38 re-invite before answer (here our > Callweaver reject > > > this invite with "Loop Detected") > > > > > > 2. No T38 re-invite at all > > > > > > 3. SIP and T38 re-invite is ok. but after starting udptl > call droped > > > with error > > > > > > > Read this page: > > http://www.callweaver.org/wiki/Faxing+With+CallWeaver > > > > At the end there is the the troubleshooting guide and what > logs we need > > to do some analisys. > > Provide logs as requested there, please. > > > > More, if you say there are 3 types of errors, provide logs > for all of them. > > > > Max > > > > P.S.: gafachi works with CW. > > > > _______________________________________________ > Callweaver-users mailing list > [email protected] > http://lists.callweaver.org/mailman/listinfo/callweaver-users > _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
