Hi Nasir, I think i have tested with both the latest spandsp versions and found no difference for me. Gafachi is working for me i will explain my setup later today.
Thanks, Vivek On 9/23/07, Nasir Iqbal <[EMAIL PROTECTED]> wrote: > > Hi Vivek, > > can you please tell me that what version of Callweaver + SpanDSP your > currently using with gafachi. > > Thanks. > > On Sun, 2007-09-23 at 21:41 -0700, Vivek Shrivastava wrote: > > Hi Nasir, > > > > I am not sure if this applicable in your case, however Gafachi does > > some ECM at their end also, and they disable only on account basis. > > BTW we also use Gafachi. > > > > Thanks, > > > > Vivek > > > > > > On 9/23/07, Nasir Iqbal <[EMAIL PROTECTED]> wrote: > > Hi Vivek, > > > > On Sun, 2007-09-23 at 19:41 -0700, Vivek Shrivastava wrote: > > > Hey Nasir, > > > > > > Have you tried disabling the ECM? You might need to request > > gafachi > > > > I have tried with both with ECM and without ECM. > > but same problem. > > > > > > > for disabling the ECM from there side too. > > > > > > Thanks, > > > > > > Vivek > > > > > > > > > On 9/23/07, Nasir Iqbal <[EMAIL PROTECTED]> wrote: > > > Hi, > > > > > > I upgraded my callweaver with lestest > > spandsp-0.0.4pre9.tgz > > > and > > > callweaver-RC-1.1.99.20070923 but same error. > > > > > > I have captured tcp traffic for gafachi, Please find > > logs from > > > following links > > > > > > > > http://www.taibapress.com/call/dump/callweaver_cli.txt > > > > > > http://www.taibapress.com/call/dump/tcpdump.txt > > > > > > > > > Thanks > > > Nasir Iqbal > > > http://www.ictinnovations.com > > > > > > On Sat, 2007-09-22 at 10:41 +0200, CtRiX wrote: > > > > Nasir Iqbal wrote: > > > > > by seeing sip messages I found the following > > three type of > > > errors. > > > > > > > > > > 1. gafachi send T38 re-invite before answer > > (here our > > > Callweaver reject > > > > > this invite with "Loop Detected") > > > > > > > > > > 2. No T38 re-invite at all > > > > > > > > > > 3. SIP and T38 re-invite is ok. but after > > starting udptl > > > call droped > > > > > with error > > > > > > > > > > > > > Read this page: > > > > http://www.callweaver.org/wiki/Faxing+With > > +CallWeaver > > > > > > > > At the end there is the the troubleshooting guide > > and what > > > logs we need > > > > to do some analisys. > > > > Provide logs as requested there, please. > > > > > > > > More, if you say there are 3 types of errors, > > provide logs > > > for all of them. > > > > > > > > Max > > > > > > > > P.S.: gafachi works with CW. > > > > > > > > > > _______________________________________________ > > > Callweaver-users mailing list > > > [email protected] > > > > > http://lists.callweaver.org/mailman/listinfo/callweaver-users > > > > > > > _______________________________________________ > > Callweaver-users mailing list > > [email protected] > > http://lists.callweaver.org/mailman/listinfo/callweaver-users > > > >
_______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
