allied internet gmbh - Stefan Priebe wrote: > Hello! > > Here again are the new logfiles. > > Question regarding full log. I'm using TxFAX to send fax shouldn't it > be enough to set "sip debug ip REGISTRAR" so that there are not all > the messages from the phones to callweaver in log? > > So here come the NEW logs: > Tcpdump: > http://server117-han.de-nserver.de/call2.dump > full.log: > http://server117-han.de-nserver.de/call2.full.log > > @Max > Thank you for helping me. > > Stefan > > CtRiX schrieb: >> allied internet gmbh - Stefan Priebe wrote: >>> Hello List, >>> >>> I've a problem sending Fax with TxFAX and T.38. The call drops each >>> time while sending. But receiving Fax with RxFAX works fine. >>> >>> You can grab the logs from here: >>> Tcpdump: >>> http://server117-han.de-nserver.de/call.dump >>> full.log: >>> http://server117-han.de-nserver.de/call.full.log >>> >>> If you need more informations or the logs are not useful please >>> write to me or the list. >> ;t38rtpsupport=yes ; Turn on support for T.38 RTP - *** >> NOT YET IMPLEMENTED *** >> ;t38tcpsupport=yes ; Turn on support for T.38 TCP - *** >> NOT YET IMPLEMENTED *** >> >> start by COMMENTING those lines in your sip.conf. >> I believe you have enabled them. >> >> Max >> >> > Max
A: Because we read from top to bottom, left to right. Q: Why should i start my reply below the quoted text? Try to grab logs without other calls, please in the logs, it's very hard to understan that happens. with all that mixed tons of calls your dialplan can also be useful because And the relevant portions of what is happening there. udptl debug, it *is* difficult to understand tells you to enable rtp and at that link on the wiki that i previously posted if you don't follow the indications that About your question: _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
