On Sep 30, 2008, at 4:19 AM, Max CtRiX wrote: > Daniel Melnechuk ha scritto: > >> Then CW sees UDPTL packets from both my SPA2102 and from the end >> point >> of the call which happens to be 64.158.162.71 (some box at >> voipum.com), >> but they are not being resent out, at least the log is not showing >> it. > > which application are you using ? > > Max
Hi Max, If i understand your question correctly, i am not using any application in CW. I "print to fax" on my Mac which dials out on the USB modem that is on an analog phone line that connects to a Linksys SPA2102 which talks to CW. My CW box is connected to TSGGlobal.com as my sip provider. Lookimg at the full log, the fax call starts going out over RTP. Then my sip provider invites CW to do T38. Then CW invites the SPA2102 to do T38 which it OKs. Then UDPTL packtets start to fly instead of RTP. SO things are looking good for a few secs. Then another invite comes in to say slow down to 9600 it looks like. Sometime later the call is ended by the fax software since something is not working. Anyway, i now have a full dump from CW logger plus a full capture of the call with wireshark. So these two files are 1.1MB together so i don't think i should put them on the list cause most people do not want to see them. Also i am concerned about changing IP addresses, phone numbers, etc, in the CW full log file. Is this being over concerned about security or a smart idea? Can i email them directly to you or someone else who will take a look? Peace, Dan _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
