Eric-Vittorio Li Destri wrote: > Hi, > > There's also T38modem. If your setup supports T38modem, the reliability > should be better because T38 protocol is specially designed for faxing over > IP. > > If you choose to use IAXmodem, your fax will be transported over a voice > codec that is not designed for this purpose, only a few codecs would give > decent results (such as G711 also called PCM) and the latency between your > provider MUST be as little as possible (less than 10ms where most dsl links > have 40ms latency). That's why i'd prefer T38 because latency is not a > problem with it. > > Give us your feedback ;) > > Eric
I was assuming that he meant either iaxmodem and callweaver running on the same network (typical latency 0.2ms), or on the same host (typical latency barely measurable, around 0.04ms). I've not tried it, but this is a common setup. _______________________________________________ Callweaver-users mailing list Callweaver-users@callweaver.org http://lists.callweaver.org/mailman/listinfo/callweaver-users
