Unable to upgrade any SMs or APs from 3.2.1 to 3.2.2 via cnMaestro. Fails immediately. We did about 20 if ours manually as a test.
On Jan 31, 2017 6:07 AM, "CBB - Jay Fuller" <[email protected]> wrote: > > hm, nothing in the release notes about db readings from remote subs. in > our 3.2 they were waaay off (6-7 db) > we never did 3.2.1, may try this - happy to hear the snmp (and reboot and > lots of other things) bug is fixed > > curious to read other reports... > > > > ----- Original Message ----- > *From:* George Skorup <[email protected]> > *To:* Camibum Networks User Group <[email protected]> > *Sent:* Tuesday, January 31, 2017 12:22 AM > *Subject:* [Cambium-users] ePMP 3.2.2 > > Getting much, much better, Cambium. Not sure if there's anything broken > yet, but it looks good so far. > > Updated a couple sites tonight. One AP was running 3.2.1. Wouldn't update, > kept failing. Rebooted it. Uh.. uptime still 26 days. ssh to it, reboot. > Nope, can't communicate with localhost. I suppose that's the snmpd bug. > Luckily I had remote power control on it. Power-cycled and then it updated > fine. > > Anyway.. updated a 2000 AP also from 3.2.1, but at least it wasn't acting > stupid. This is the site where we tried a 1000 GPS AP co-located with a > couple 5.7 FSK APs and very short range SMs. And the APs are P9s which > don't support SM Tx power control. Even the 5.4 band on the 1000 wouldn't > work, not even with sync. The receiver was simply too overloaded. No SM > could achieve over MCS1 uplink. Well, the 2k AP solved all that and is > running in the 5.4 band with no issues that I can see. > > Here's the frame config. Max range is 5 miles to sync with the 5.7 FSK APs > at 2 miles, 75% and 2 control slots, which is what the ePMP-PMP100 excel > calculator told me. > > > And a linktest to a Force200. > > ------------------------------ > > _______________________________________________ > Cambium-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/cambium-users > > > _______________________________________________ > Cambium-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/cambium-users > >
_______________________________________________ Cambium-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/cambium-users
