Also tried last night to upgrade 15 SM's on one sector and they also fail immediately in cnMaestro. Not a good sign. Hope they get this fixed and more solid.
On Tue, Jan 31, 2017 at 7:56 AM, Chadwick Wachs <[email protected]> wrote: > Unable to upgrade any SMs or APs from 3.2.1 to 3.2.2 via cnMaestro. Fails > immediately. We did about 20 if ours manually as a test. > > On Jan 31, 2017 6:07 AM, "CBB - Jay Fuller" <[email protected]> > wrote: > >> >> hm, nothing in the release notes about db readings from remote subs. in >> our 3.2 they were waaay off (6-7 db) >> we never did 3.2.1, may try this - happy to hear the snmp (and reboot and >> lots of other things) bug is fixed >> >> curious to read other reports... >> >> >> >> ----- Original Message ----- >> *From:* George Skorup <[email protected]> >> *To:* Camibum Networks User Group <[email protected]> >> *Sent:* Tuesday, January 31, 2017 12:22 AM >> *Subject:* [Cambium-users] ePMP 3.2.2 >> >> Getting much, much better, Cambium. Not sure if there's anything broken >> yet, but it looks good so far. >> >> Updated a couple sites tonight. One AP was running 3.2.1. Wouldn't >> update, kept failing. Rebooted it. Uh.. uptime still 26 days. ssh to it, >> reboot. Nope, can't communicate with localhost. I suppose that's the snmpd >> bug. Luckily I had remote power control on it. Power-cycled and then it >> updated fine. >> >> Anyway.. updated a 2000 AP also from 3.2.1, but at least it wasn't acting >> stupid. This is the site where we tried a 1000 GPS AP co-located with a >> couple 5.7 FSK APs and very short range SMs. And the APs are P9s which >> don't support SM Tx power control. Even the 5.4 band on the 1000 wouldn't >> work, not even with sync. The receiver was simply too overloaded. No SM >> could achieve over MCS1 uplink. Well, the 2k AP solved all that and is >> running in the 5.4 band with no issues that I can see. >> >> Here's the frame config. Max range is 5 miles to sync with the 5.7 FSK >> APs at 2 miles, 75% and 2 control slots, which is what the ePMP-PMP100 >> excel calculator told me. >> >> >> And a linktest to a Force200. >> >> ------------------------------ >> >> _______________________________________________ >> Cambium-users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/cambium-users >> >> >> _______________________________________________ >> Cambium-users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/cambium-users >> >> > _______________________________________________ > Cambium-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/cambium-users > > -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi <http://www.facebook.com/minnesotawifi> Like us on Facebook <http://www.facebook.com/minnesotawifi>
_______________________________________________ Cambium-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/cambium-users
