Hello,
I have a friend locally who does a lot of powder coating for me. He is in
the aircraft industry.
Let me know if I can help you get anything power coated. It is a great way
to go and he is one of the best and least expensive around!
Also you could plate the items but this is much more expensive, especially
if you are trying to color it.
Sincerely,
Jim Headley
Casper, Wyoming USA
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Ron Baker
Sent: Sunday, February 25, 2001 4:01 PM
To: [EMAIL PROTECTED]
Subject: Re: [Cameramakers] Re: Blackening Brass Rails
Hi everyone
Another thought is to have the parts powder coated a process that starts
with putting an electrical charge on the part that is to receive the finish
and then a resin powder , an opposite charge, is sprayed on the part. The
part is then put in an oven, at about 480 degrees, and baked until done.
This is not an exact proceedure but close and it provides a very hard
finish. The only kicker here is that you will have to find some one that is
equipped to do this kind of finish. This process is getting more popular and
more common and shouldn't be too expensive.
Ron
www.ronbakerphotography.com
_______________________________________________
Cameramakers mailing list
[EMAIL PROTECTED]
http://rmp.opusis.com/mailman/listinfo/cameramakers
