Hi Dave
I have a Condit punch that will punch 8x10 down to 35mm and I also have a
Condit pin register negative carrier for a Beseler 4x5. The negative carrier
also doubles for a contact printer with the negative and copy film
sandwiched between two pieces of glass. I could take some pictures of it
and email them. I could put them on my web site if anyone would be
interested in seeing them.
Ron
----- Original Message -----
From: "Dave Schneider" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 19, 2001 2:24 PM
Subject: [Cameramakers] Pin Register Carrier
> A bit off topic for camera builders, but this is a do it yourself group of
> people.
>
> Does anyone have plans, experience, advice on building a pin register
punch
> and negative carrier? I am trying to come up with a solution that will
work
> with 120 and 4x5 negatives. I need to make a punch and glass sandwich
> carrier that will work with an Omega D5. I have seen Mr. McNutt's article,
> the design looks fine but would be interested in any other ideas.
> _______________________________________________
> Cameramakers mailing list
> [EMAIL PROTECTED]
> http://rmp.opusis.com/mailman/listinfo/cameramakers
_______________________________________________
Cameramakers mailing list
[EMAIL PROTECTED]
http://rmp.opusis.com/mailman/listinfo/cameramakers
