The only thing I would strongly suggest is that you replace the rail with square aluminum tubing. It may be a bit less "Crafty" but at least you are 100% sure it wont twist. The next thing I could say with this design is that you got to be sure that the wood is very straight and stable (dry) choose very carefully. L-shape standard in wood might be a problem if wood is not the suitable kind.
Robert Mtl, Quebec On 2/3/02 12:47 AM, "John" <[EMAIL PROTECTED]> wrote: > Nice work. Just lighten the load a little. 180,K for one > page is a little over the top for those of us on a dial-up (about > 80% of the country). > > Regards > > John S. Douglas Photographer & Webmaster > http://www.darkroom-pro.com - http://www.darkroompro.net > Formulas, Facts and Info on the Photographic Process > ------------------------------------------------------------------------------ > > > On Sat, 2 Feb 2002 20:09:53 -0700, you wrote: > >> I have finally finished the online plans for the camera I was building. If >> I could get a few people to take a look at the plans and make sure I didn't >> miss anything I would greatly appreciate it. Any suggestions or criticisms >> would be welcome. Thanks! Here's the link: >> >> http://rhoadescameras.bizland.com/Camera%20Creation/Camera%202/camera2.htm >> >> Dan Rhoades > > _______________________________________________ > Cameramakers mailing list > [EMAIL PROTECTED] > http://rmp.opusis.com/mailman/listinfo/cameramakers _______________________________________________ Cameramakers mailing list [EMAIL PROTECTED] http://rmp.opusis.com/mailman/listinfo/cameramakers
