Hi All:
I have an application for a stepper that needs to be able to lift and
lower a load repeatedly at frequent intervals for long durations using a
ballscrew.
Here's the stats:
Weight to lift...100 lb max
Pitch of screw...0.200"
Speed of lift or lower... 20" per min max
Belt reduction...1:2.
Typical motion stroke... 0.020"
Typical duration of action ...8 hours
My question is: how do I set up the calculation to determine the size of
stepper I need assuming negligible friction in the guide rails (linear ways)
and screw (ballscrew) and allowing a decent margin of safety.
The application demands good response time and I don't want to let the
system get hot, so I'm thinking to overbuild rather than go too skimpy.
Thanks in advance
Cheers
Marcus
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: [EMAIL PROTECTED]
Subscribe: [EMAIL PROTECTED]
Unsubscribe: [EMAIL PROTECTED]
List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have
trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to
the CCED group, as many of the same members are there, for OT subjects, that are not
allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST
IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
