Brian wrote:
> Does any one out there have a brass diesel filler to hand that they
> could measure for me. I need to know the diameter of the spout that
> normally on a Narrowboat hangs into the tank, I take it it's actually a
> hose tail probably 38mm. The diameter of the top flange and the
> thickness of the top flange.
ASAP do them in 38mm. 51mm and 1.5" BSP. The 51mm is actually about 49mm
diameter spout, but needs at least a 56mm hole, The top flange is 82mm
diameter, and 4mm thick.
HTH
Iain
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/canals-list/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/canals-list/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
