Bruce Napier presented the following explanation :
> On 14 Mar 2008, at 12:44, Brian from sunny Suffolk wrote:
>
>> Does any one out there have a brass diesel filler to hand that they
>> could measure for me. I need to know the diameter of the spout that
>> normally on a Narrowboat hangs into the tank, I take it it's actually a
>> hose tail probably 38mm. The diameter of the top flange and the
>> thickness of the top flange.
>>
> Hi Brian
>
> Int dia = ~35 mm (as well as I can measure with the filler in place),
> so yes, it's a 38 mm hose tail
> Top flange dia = 75 mm
> Flange thickness = 6 mm
> HTH - have just got earache from Sheila for leaving back doors open
> while I measured these when she wanted to get undressed in the master
> cabin to have a shower. (Apparently this is my fault ;-0)
All I can say to that is thanks very much and I'm sorry for your ear
ache
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/canals-list/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/canals-list/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
