Hi Joseph,
I'm not sure, but the problem is with the topo file. If you made any
cuts during the initial flat review stage, did you save your CUT topo
file? Normally, it's not necessary to save the topo file, because Caret
saves it automatically when you run Flatten Full Hemisphere and Morph
Sphere, just before Caret displays the initial flat map with the
Continue button. But if you make cuts at the initial flat map stage,
then you need to save the resulting topo file, and it's usually a good
idea to use some of the features under the Surface: Topology menu (e.g.,
remove corners and stragllers), before saving the topo, to make sure
things are well-behaved.
At first, I thought you were viewing your flat map with the closed topo
(after_save.jpeg), but your edges only (after_save_edges.jpeg) leaves me
unsure. Some nodes got sucked to the origin, as if cuts were made, and
the coord saved, but not the topology.
Maybe John, Erin, or David will recognize this more readily.
Donna
On 07/09/2007 10:39 PM, Vu, An wrote:
Hi All,
I don't know why, but I seem to be getting these strange edge artifacts in the
flattened surface in this hemisphere (I've flattened others before without
getting this artifact). Before saving, it looks just fine. But after I save and
open the spec file again, you can see the edge artifacts. I've tried saving
under different settings and restarting from scratch, but those things don't
seem to help. Does anyone know how to solve this? Let me know if you need
anymore info.
Thanks!
Joseph
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
caret-users mailing list
caret-users@brainvis.wustl.edu
http://pulvinar.wustl.edu/mailman/listinfo/caret-users
