Hello,
j'ai installé sur une Deb Etch speech-dispatcher 0.6.1-2, qui, comme
l'indiquait récemment Sam, vient avec le module cicero.
J'ai édité speechd.conf et l'ai mis ici en pièce jointe. Je n'ai pas touché
à autre chose; ai-je oublié quelque chose? dois-je éditer l'un ou l'autre
module et par ex. cicero.conf?
Je précise avoir installé cicero et mbrola-fr4 par les paquets .deb et que
hormis tts_shell.py, bulktalk.py et wphons.py j'ai fait aucun autre lien
symbolique à partir de /usr/local/bin,
et j'espère qu'on est pas obligé d'installer des fichiers .py ailleur?
En tout cas, si avant, un spd-say toto prononçait toto par Festival, là après
redémarrage il ne sort plus un milligram de son/voix, et surtout pas celle
de Cicero+Mbrola, dont je vois que le processus (ps ax en pj) est "defunct".
Enfin, les logs cicero sont vides.
What now?
Aldo.
# Global configuration for Speech Dispatcher
# ==========================================
# -----SYSTEM OPTIONS-----
# Port on which Speech Dispatcher should be available
# to clients.
# Port 6560
# This should be the path where Speech Dispatcher's configuration
# is stored, it's the base directory for Include commands in this
# file.
IncludePath "/etc/speech-dispatcher/"
# -----DEBUGING CONFIGURATION-----
# LogLevel is a number between 0 and 5 that specifies
# how much of the logging information should be printed
# out on the screen or in the logfile (see LogFile)
# 0 means nothing, 5 means everything (not recommended).
LogLevel 3
# LogFile specifies where should Speech Dispatcher write it's logging
# messages (status information, error messages, etc.)
# Specify "stdout" for standard console output
# or a full path to some file which the log should be written to.
LogFile "/var/log/speech-dispatcher/speech-dispatcher.log"
#LogFile "stdout"
# CustomLogFile allows logging all messages of the given kind, regardless their
# priority, to the given destination.
#CustomLogFile "protocol"
"/var/log/speech-dispatcher/speech-dispatcher-protocol.log"
# -----MISC OPTIONS-----
# MaxHistoryMessages specifies the maximum number of messages
# that are stored in history. If they are more, older messages
# expire.
# MaxHistoryMessages 10000
# SoundDataDir specifies the directory where sounds
# are stored by default.
# SoundDataDir "/usr/share/sounds/sounds-library"
# DefaultRate controls how fast the synthesizer is going to speak.
# It's parameter must be between -100 (slowest) and +100 (fastest),
# default is 0.
# DefaultRate 0
# DefaultPitch controls the pitch of the synthesized voice.
# It's parameter must be between -100 (lowest) and +100 (highest),
# default is 0.
# DefaultPitch 0
# DefaultVolume constrols the default volume of the voice.
# It is a value between -100 (softly) and +100 (loudly).
# Currently, +100 maps to the default volume of the synthesizer.
DefaultVolume 100
# DefaultVoiceType controls which voice type should be used.
# Because voices are synthesizers specific, you only set here
# a symbolic name, which, if possible, is mapped to some of
# the synthesizers voices. Please see the synthesizer-specific
# configuration in etc/speechd/modules/ to see what voices are
# defined for the different symbolic names.
# Currently, these symbolic names are supported:
# MALE1, MALE2, MALE3, FEMALE1, FEMALE2, FEMALE3
# CHILD_MALE, CHILD_FEMALE
# DefaultVoiceType "MALE1"
# Default language with which to speak
# DefaultLanguage "en"
DefaultLanguage "fr"
# DefaultClientName specifies the name of a client
# who didn't introduce himself at the beginning of
# a SSIP session.
#
# (Note that if you see this string during working
# with Speech Dispatcher aplications as a user, it's a good
# reason to complain to the autor of said application!)
# DefaultClientName "unknown:unknown:unknown"
# Use with caution, normally this shouldn't be changed globally
# DefaultPriority "text"
# DefaultPauseContext specifies how by how many index marks a speech cursor
# should return when resuming after a pause. This is roughly equivalent to
# the number of sentences before the place of the execution of pause that
# will be repeated.
# DefaultPauseContext 0
# -----SPELLING/PUNCTUATION/CAPITAL LETTERS CONFIGURATION-----
# DefaultPunctuationMode sets the way dots, comas, exclamation
# marks, question marks etc. are interpreted.
# none - they are ignored
# some - some of them are sent to synthesis
# (see
DefaultPunctuationSome)
# all - all punctuation marks are sent to synthesis
# DefaultPunctuationMode "none"
# DefaultCapLetRecognition: if set to "icon" or "insert_sound",
# capital letters are distinguished from other text automatically,
# otherwise only on client request.
# DefaultCapLetRecognition "none"
# DefaultSpelling: if set to On, every messages will
# be spelled unless set otherwise. (This is usually
# not something you want to do.)
# DefaultSpelling Off
# -----OUTPUT MODULES CONFIGURATION-----
# AddModule loads an output module.
# Syntax: AddModule "name" "binary" "configuration" "logfile"
# - name is the name under which you can acces this module
# - binary is the path to the binary executable of this module,
# either relative (to lib/speech-dispatcher-modules/) or absolute
# - configuration is the path to the config file of this module,
# either relative (to etc/speechd/modules/) or absolute
# - logfile is the path where logging information should be stored
# (most modules support debug logging, see their configuration)
#AddModule "flite" "sd_flite" "flite.conf"
"/var/log/speech-dispatcher/flite.log"
AddModule "festival" "sd_festival" "festival.conf"
"/var/log/speech-dispatcher/festival.log"
#AddModule "espeak-generic" "sd_generic" "espeak-generic.conf"
"/var/log/speech-dispatcher/espeak.log"
#AddModule "epos-generic" "sd_generic" "epos-generic.conf"
"/var/log/speech-dispatcher/epos.log"
#AddModule "dtk-generic" "sd_generic" "dtk-generic.conf"
"/var/log/speech-dispatcher/dtk-generic.log"
#AddModule "ibmtts" "sd_ibmtts" "ibmtts.conf"
"/var/log/speech-dispatcher/ibmtts.log"
AddModule "cicero" "sd_cicero" "cicero.conf"
"/var/log/speech-dispatcher/cicero.log"
# The output module testing doesn't actually connect to
# anything. It outputs the requested commands to standard output
# and reads responses from stdandard input. This way, Speech Dispatcher's
# communication with output modules can be tested easily.
# AddModule "testing"
# DefaultModule selects which output module is the default.
# You must use one of the modules loaded with AddModule.
#DefaultModule flite
DefaultModule cicero
# LanguageDefaultModule selects which output modules are prefered
# for specified languages.
LanguageDefaultModule "fr" "cicero"
#LanguageDefaultModule "en" "flite"
#LanguageDefaultModule "cs" "festival"
LanguageDefaultModule "en" "festival"
#LanguageDefaultModule "es" "festival"
# -----CLIENT SPECIFIC CONFIGURATION-----
# Here you can include the files with client-specific configuration
# for different types of clients. They must contain one or more sections with
# this structure:
# BeginClient "emacs:*"
# DefaultPunctuationMode "some"
# ...and/or some other settings
# EndClient
# The parameter of BeginClient tells Speech Dispatcher to which clients
# it should apply this settings (it does glob-style matching, you can use
# * to match any number of characters and ? to match one character)
Include "clients/emacs.conf"
Include "clients/gnome-speech.conf"
Cicero est defunct:
2934 ? Z 0:00 [sd_cicero] <defunct>
Speech-dispatcher a pourtant quant à lui été lancé:
2936 ? Ssl 0:00 /usr/bin/speech-dispatcher
_______________________________________________
Liste de diffusion CarrefourBLinuX
[email protected]
http://lists.freearchive.org/mailman/listinfo/carrefourblinux
Pour s'inscrire par courriel :
'mailto:[EMAIL PROTECTED]'
Pour se retirer de la liste par courriel :
'mailto:[EMAIL PROTECTED]'
Archives : http://lists.freearchive.org/pipermail//carrefourblinux
Anciennes archives (Yahoogroupes) :
http://fr.groups.yahoo.com/group/carrefourblinux/messages
Rechercher : http://lists.freearchive.org/cgi-bin/search.cgi
Signets : http://fr.groups.yahoo.com/group/carrefourblinux/links/
Fiches EDU : http://blinuxwiki.pbwiki.com/FichesEdu
