I am also interested in this. I see that the clock measure and reset functionality seems to be implemented in /pcores/opb_clockcontroller/hdl/user_logic.vhd All of the logic in there seems like it should work, but when you look at the system.mhs file, the relevant signals are connected to dcm_2 in my case, which has its CLKIN signal connected to net_gnd, which explains why it always reads 0. It would be great if this could be connected to the ADC's DCM, but I don't know how to access that as I don't see it in the mhs file.
Glenn On 6/5/08, David MacMahon <[email protected]> wrote: > > Does anyone use the clkmeasure command on the ibob? It always returns... > > Clock frequency: 0.0000 Mhz > Current phase : 0 degrees > > ...for our ibobs that are using ADC clock (that is definitely more than > 0.0000 MHz). Which clock is it supposed to be measuring? If it's not used > or usable, can we please eliminate it? It takes up valuable software space. > > Likewise for the "clkreset" and "clkphase" commands. > > Thanks, > Dave > > >
