hi sergie and jouko,
i'm not an expert at PS3 -
my group tried to port a few programs -
some were successful - those with a small memory footprint.
it's a pretty painful programming environment.
s...@home was a disaster (s...@home does 128K point FFT's),
sony had three of their best engineers working on it for
a long time and finally gave up.
we've also played with GPU's.
i'm not a big fan of specialized architectures,
because they come and go, and you can't port software
to the next generation (eg: array processors, cell, GPU's,
bluegene torus interconnect, etc, are short lived).
i like beowulf clusters with every node connected to every node
through a switch and MPI, because
they have/will be around for a long time and it's relatively
easy to develop and port software through several generations of hardware.
dan
Jouko Ritakari wrote:
Hi all,
On Tue, 24 Jun 2008, Sergei Pogrebenko wrote:
I also had some doscussions with Dan Werthimer about his FPGA plans
(in a wake of uniboard project) and about Sony PS3. He and his team
tried to re-write s...@home for PS3, but got it sadly running well below
expectation. They contacted Sony/IBM compiler guys, but for 3 month
no answer.
We fortunately have the answer.
Even vectorized and optimized code for PS3 often gets five to ten per
cent of the actual calculation capacity.
It's a bit tricky to get the (about) 90% we got, we took Daniel
Hackenberg's matmul program and modified it. Daniel actually got 97%
efficiency, we didn't bother about the last seven per cent. It's less
expensive to buy more playstations.
Cross-pol feature is also of interest in a wake of new (ATA-kind)
very broad band linear polarized feeds, so the conversion to circular
polarization has to be done. For that the cross-pol complex spectrum
should be calculated.
Our results are very in-line with FPGA spectrometers, although they
are much faster, it's difficult to get really hign resolution with them.
Well, the cell processors are the best you can have at the time, for
some of the tasks. FPGAs or display controllers are better for very
limited tasks, normal Intel-architecture or powerpc processors for very
big.
If you have to do number-crunching the cell processor may be the best.
And for you casper people, the PS3 control program may be even better
platform than PS3 Linux although much trickier. The folding-at-home
people are the ones to ask, they have the experience.
Best regards,
Jouko
