hi wan, i don't know of anyone who has roach ethernet problems at 100 Mbit/sec. i'm cc'ing casper community to see if anyone has any ideas. in general, it's good to post questions to cas...@lists, so that everyone can help answer, and everyone can see the answers, and the info will be captured in the wiki/email archive. if you want you can buy or ask digicom if they can send you another national PHY chip and see if this helps. also you might want to try using short cable, and/or a cat6 cable. is your roach connected directly to a computer, or going through a switch? might be interesting to try a different NIC or different switch or different computer. best, dan On 10/29/2009 02:47 PM, [email protected] wrote:
Hi Dan: I believe you have done a very nice job. My problem is Ethernet port is not very reliable. Even running at 100MHz, the Ethernet port will be disconnected at some times. Normally, it can resume after reboot whole system. And I could not transfer big file through ethernet. Small files like a few MB are all right. But I could not download 1GB file from Roach at all. So Dan, could this problem be solved by replacing the on board PHY? Thanks Wan
