Hi, John,
Did you ever get any replies to your query from last December?
I just built a BEE2 design using 10.1 (and mlib_devel_10_1), but I
can't get it to work. No TinySH, and reads/writes to /proc/<pid>/hw/
ioreg/* just hang.
Do I have to go back to 7.1 for BEE2 development?
Thanks,
Dave
On Dec 22, 2009, at 15:27 , John Ford wrote:
Hi. Does anyone know what the status of this is? Does borph on
the bee2
work under 10.1?
John
Hello,
When I've had odd behavior like this before it turned out to be a
corrupt
bof file. I would try recopying the design to the BEE2, but
admittedly
it's
a bit of a long shot.
Glenn
On Wed, Dec 16, 2009 at 11:49 PM, Oussama Sekkat <[email protected]>
wrote:
Hi All,
I just compiled one of my design and ran it on Bee2.
I notice 2 things:
1. When I run the bof file, I don't get the usual Bee2 message:
****************************
* TinySH lightweight shell *
****************************
Design name : bee_erg_det_v4p3
Compiled on : 29-Nov-2009 23:46:31
DON'T PANIC ;-)
Type 'help' for help
Type '?' for a list of available commands
BEE2 %
2. when I try to read or write a register, it just hangs!
Any ideas what could have gone wrong here?
The funny thing is that I only added a couple blocks to one of my
previous
design that worked fine! Now I'm getting this strange issue.
Please let me know if you ran into a similar problem before and
if you
know
how to deal with it.
Any input would be greatly appreciated.
Thanks!
Oussama.
