Hi team,
Thank you Mark for your suggestion, I identify two blocks pfb_fir_real
and fft_wideband_real (only green blocks) I read all the parameters and
I insert the same blocks again (the fft block has two different
parameters from the tutorial and the pfb only one) the pfb block now
shows two extra ports related to an strange second signal (an input
pol2_in1 and an output pol2_out1) so I replace this pfb block without
making connections in those ports (except for a terminator on
pol2_out1). After run simulation and wait for some minutes an error
window pops up:
Message Source Reported by Summary
Model Error Unknown Simulink Error due to multiple causes.
Block Error pfb_fir_real Simulink Error in 'tut3/pfb_fir_real':
Initialization commands cannot be evaluated.
The first error still chasing me to hell, and the second I think it is
related to this new strange ports (pol2), the parameter "coefficient
bitwidth" is set to 18 bits according to the original design but the
tutorial suggest to be less than or equal to the input bit width (8), it
this alright?
Any insights?
thank you.
Daniel H.
On Tue, 15 Feb 2011 13:33:20 -0800, Mark Wagner
<[email protected]> wrote:
Hi Daniel,
This error occurs when the Simulink design is updated. It's
possible the library you've loaded has blocks that are different than
those used to create the original design. If you start a simulation
(Simulation --> Start), the error dialog box should pop up with more
detailed information about the offending block or connection. If the
issue is a block, try deleting it and replacing it with one from your
library.
Mark
2011/2/15 Daniel Esteban Herrera Peña
Hi everyone,
I could get a 800MHz clock source to test the spectrometer in tut3
(using the pre-compiled file you provided) with successful results
including changing the input frequency to 1GHz, now I want to change
the adc input clock to 2GHz (I see that I must change to interleave
mode), but first I tried to synthesize the r_spec_2048_r105 without
making any change and I receive this error:
Detected Linux OS
#############################
## System Update ##
#############################
Error using ==> gen_xps_files at 199
Error due to multiple causes.
If I knew just one cause I will be happy trying to resolve it, but I
have no clue at all. I saw in the forums some issue regarding the adc
block, I tried to follow those steps (re-adding adc block, disabling
link) but the problem persist. Does anyone knows how to inspect more
deeply the error I'm having?.
Thanks.
Daniel H.
Links:
------
[1] mailto:[email protected]
--
--------------------------------
Daniel Esteban Herrera Peña
Ingeniero Civil Electrónico
Universidad de Concepción, Chile.
(41)236-0289 842-38325
--------------------------------
