Hello,
For some reason bee_xps complains with the following error message which
points to the 'real_square' block within the Power block in one of the
casper tutorials. I just can't seem to get this resolved. I opening the
real_square block's preferences and unchecking 'test for optimum
pipelining' under the Implementation tab. When I ran bee_xps again it
seemed to work but then complained about the 'imag_square' block too. While
deselecting 'test for optimum pipelining' seems to make the problem go
away, I'm sure this not the way to go about it. Could it be my Xilinx
installation since it's also complaining about the Multiplier core?
I've attached the error log to this email and pasted what seemed to be the
relevant line below:
Cannot load Multipler core Tcl script: Failed to send command: source
"/opt/Xilinx/11.1/ISE/coregen/ip/xilinx/dsp/com/xilinx/ip/mult_gen_v11_2/gui/mult_gen_v11_2_utils.tcl"<matlab:das_dv_hyperlink%28%27DAS%27,%27txt%27,%27/opt/Xilinx/11.1/ISE/coregen/ip/xilinx/dsp/com/xilinx/ip/mult_gen_v11_2/gui/mult_gen_v11_2_utils.tcl%27%29>Error
occurred during "Rate and Type Error Checking". Reported by:
'tut_3/power1/real_square'<matlab:das_dv_hyperlink%28%27DAS%27,%27mdl%27,%27tut_3/power1/real_square%27%29>
--
-- Louis Dartez
(956) 372-5812
Arecibo Remote Command Center Scholar
Center for Gravitational Wave Astronomy
University of Texas at Brownsville
--------------------------------- Version Log ----------------------------------
Version Path
System Generator 11.4.2254 /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen
AccelDSP 11.4.2254 /opt/Xilinx/11.1/DSP_Tools/lin64/AccelDSP
Matlab 7.8.0.347 (R2009a) /usr/local/bin/matlab_R2009a
ISE 11.4.i /opt/Xilinx/11.1/ISE
--------------------------------------------------------------------------------
Summary of Errors:
Error 0001: Error loading IP information
Block: 'tut_3/power1/real_square'
--------------------------------------------------------------------------------
Error 0001:
Reported by:
'tut_3/power1/real_square'
Details:
Cannot load Multipler core Tcl script: Failed to send command:
source
"/opt/Xilinx/11.1/ISE/coregen/ip/xilinx/dsp/com/xilinx/ip/mult_gen_v11_2/gui/mult_gen_v11_2_utils.tcl"
Error occurred during "Rate and Type Error Checking".
--------------------------------------------------------------------------------
