Hi Laura, here are instructions for setting up 12.4 labtools, the same procedure will work for setting up the full version.
Install Xilinx in /opt/Xilinx - Download Xilinx 12.4 Labtools. This can be downloaded from http://www.xilinx.com - Untar (tar -xvf Xilinx_LabTools_12.4_M.81d.2.0.tar) and install by running “sudo ./xsetup” in the Xilinx directory. - Generate a webpack licence on the website, a lic file will be emailed to you. During installation select the webpack licence and follow instructions. - To run Xilinx Impact type the following in a terminal (source runs a pearl script that sets up the Xilinx paths): source /opt/Xilinx/12.4/LabTools/settings64.sh impact Regards Alec On Wed, Feb 15, 2012 at 12:36 AM, Laura Vertatschitsch <[email protected]>wrote: > Hi guys, first post. > > We are setting up a machine from scratch. The 2011 tutorials section > seems to indicate the all the machines were set up with Xilinx 11.5 on > machines running 64 bit Ubuntu. Are there instructions on how this set up > was achieved? Everything I read on the wiki seems to say that deviating > from the xilinx-blessed operating systems will result in bad news. We got > everything set up using the latest Ubuntu 11.10, Matlab 2009a, Xilinx 11.5, > by following the LINUX XPS page and introducing the simple case statement > in bee_xps to allow 11.5. We are getting some errors at the end of the > compile of tutorial 1 - but wanted to check if there was further > documentation on the setup that we could read first. > > Laura Vertatschitsch > Electrical Engineering > University of Washington >
