Hi Jason, I think Mo had different Kingston DIMMs which are not 1gig, but the supplier claims that they are compatible. We have to be very careful when choosing the DIMM as we can only support a few different modules as the gateware controller has the SPD information hard coded.
I am unsure of the status, but Alec will be able to help out, when he gets into the office tomorrow morning (South African Time). I noticed the wiki page heading read ROACH DDR3 Memory. I have changed it to ROACH2 DDR3 Memory. So the link is now at https://casper.berkeley.edu/wiki/ROACH2_DDR3_Memory_Modules Regards Wes On Thu, Oct 25, 2012 at 10:16 PM, Jason Castro <jcas...@nrao.edu> wrote: > The following web page lists two memory modules for use in the ROACH2: > > https://casper.berkeley.edu/**wiki/ROACH_DDR3_Memory_Modules<https://casper.berkeley.edu/wiki/ROACH_DDR3_Memory_Modules> > > Kingston KVR1333D3S8R9S/1G > Samsung M393B5773CH0-CH9 > > Mo at Digicom was only aware of the Kingston Module as being approved for > use in the ROACH2. He also reported that the Kingston Module may have some > problems as well. Can anyone give me updated information on this topic? > > Thanks, > > Jason Castro > > > > >
