Hi, Alec,
On Oct 25, 2012, at 8:29 AM, Alec Rust wrote:
> 6. when done type: "reset". You should see u-boot loading and *** Warning -
> bad CRC, using default environment. All the macros are reset to defaults.
I tftp'd the new uboot image, wrote it to flash, typed "reset", and did indeed
see the warning message you describe. I also saw a bunch of I2C error (see
below). Are these normal for a Rev 1 board or does they mean that this board
has problems that should be addressed?
Thanks,
Dave
=> reset
U-Boot 2011.06-rc2-00000-g8f3f444-dirty (Oct 25 2012 - 15:40:35)
CPU: AMCC PowerPC 440EPx Rev. A at 533.333 MHz (PLB=133 OPB=66 EBC=66)
No Security/Kasumi support
Bootstrap Option C - Boot ROM Location EBC (16 bits)
32 kB I-Cache 32 kB D-Cache
Board: ROACH2
I2C: ready
DRAM: 512 MiB
Flash: 128 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
CPLD: 2.1
USB: Host(int phy)
I2C read: failed 2
cannot read from i2c device: 54
I2C write: failed 6
DTT: 1 FAILED INIT
I2C write: failed 6
DTT: 2 FAILED INIT
Net: No ethernet found.
Sensors ConfigI2C write: failed 6
cannot write to i2c device: 50@42
max16071: vmon config failed
I2C write: failed 6
cannot write to i2c device: 51@42
max16071: cmon config failed
I2C write: failed 6
cannot write to i2c device: 4c@01
ad7414: ambient0 config failed
I2C write: failed 6
cannot write to i2c device: 4e@01
ad7414: ambient1 config failed
I2C write: failed 6
cannot write to i2c device: 18@12
max1805: remote temp config failed
I2C write: failed 6
cannot write to i2c device: 48@00
max6650: fpga fan config failed
I2C write: failed 6
cannot write to i2c device: 4b@00
max6650: chs0 config failed
I2C write: failed 6
cannot write to i2c device: 1b@00
max6650: chs1 config failed
I2C write: failed 6
cannot write to i2c device: 1f@00
max6650: chs2 config failed
